mazhiyuan
/
P1UWaterBase
1
0
Fork 0
Code Issues Pull Requests Packages Projects 1 Releases Wiki Activity
P1UWaterBase/hardinterface/E7025/nb_driver_E7025.h

561 lines
23 KiB
C
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/************************************************************************************
* @Copyright (c) :(C)2017, Qindao ieslab Co., Ltd
* @FileName :nb_driver_bc25.h
* @Author :QDIES PLATFORM TEAM
* @Version :V1.0
* @Date :2020-8-13
* @Description :
************************************************************************************/
#ifndef __NB_DRIVER_E7025_H
#define __NB_DRIVER_E7025_H
#include "sys_config.h"
#ifdef NB_MODULE_E7025
#include "type.h"
#include <string.h>
/*----采用宏定义 AT_ORDER_SET 来指定走哪个指令集--*/
//#define M_5310_N 0 //M5310 普通指令集
//#define M_5310_A 1 //M5310A 指令集
//#define AT_ORDER_SET M_5310_A
/*------为了简化程序 暂时没有合成到一起----------*/
/*-------模块登录服务器IP表示形式---
*----IP_PORT IP形式
*----DOMAIN_NAME 域名形式 默认域名模式
*----BOOTSTRAP_ENABLE 启动模式 0-接入机模式 1-引导机模式
*----接入机模式 IP：183.230.40.40:5683 域名:nbiotacc.heclouds.com:5683
*----引导机模式 IP：183.230.40.39:5683 域名:nbiotbt.heclouds.com:5683
-----------------------------------*/
//#define IP_PORT_TYPE 0
//#define DOMAIN_NAME_TYPE 1
//#define SEVER_IP_TYPE DOMAIN_NAME_TYPE
//#define BOOTSTRAP_ENABLE 0
/*--------------------------------------*/
/*-----设置是否打开GSM网络校时--------
* 1---打开 默认打开
* 0---关闭
*/
/*------------------------------------*/
/*-----设置发送数据是否打开ACK--------
* 1---打开
* 0---关闭 默认关闭
*/
#define SEND_ACKID_ENABLE 0
/*------------------------------------*/
#if (HARDWARE_VERSION==0x14)//方壳表
#define RSTN_NB_PORT (GpioPortF)
#define RSTN_NB_PIN (GpioPin0)
#define BAT_NB_PORT (GpioPortE)
#define BAT_NB_PIN (GpioPin4)
#define PWR_NB_PORT (GpioPortF)
#define PWR_NB_PIN (GpioPin1)
#define NB_PSM_WAKE_PORT (GpioPortA)
#define NB_PSM_WAKE_PIN (GpioPin2)
#elif (HARDWARE_VERSION==0x18)//圆壳表
#define RSTN_NB_PORT (GpioPortE)
#define RSTN_NB_PIN (GpioPin4)
#define BAT_NB_PORT (GpioPortE)
#define BAT_NB_PIN (GpioPin5)
#define PWR_NB_PORT (GpioPortE)
#define PWR_NB_PIN (GpioPin2)
#define NB_PSM_WAKE_PORT (GpioPortE)
#define NB_PSM_WAKE_PIN (GpioPin3)
#endif
#define RSTN_NB_LOW() Gpio_WriteOutputIO(RSTN_NB_PORT, RSTN_NB_PIN, GPIO_PIN_SET)
#define RSTN_NB_HIG() Gpio_WriteOutputIO(RSTN_NB_PORT, RSTN_NB_PIN, GPIO_PIN_RESET) //高电平复位
#define BAT_NB_DISABLE() Gpio_WriteOutputIO(BAT_NB_PORT, BAT_NB_PIN, GPIO_PIN_RESET)
#define BAT_NB_ENABLE() Gpio_WriteOutputIO(BAT_NB_PORT, BAT_NB_PIN, GPIO_PIN_SET)
#define PWR_NB_LOW() Gpio_WriteOutputIO(PWR_NB_PORT, PWR_NB_PIN, GPIO_PIN_SET)
#define PWR_NB_HIG() Gpio_WriteOutputIO(PWR_NB_PORT, PWR_NB_PIN, GPIO_PIN_RESET)
#define NB_PSM_WAKE_LOW() Gpio_WriteOutputIO(NB_PSM_WAKE_PORT , NB_PSM_WAKE_PIN, GPIO_PIN_SET)
#define NB_PSM_WAKE_HIG() Gpio_WriteOutputIO(NB_PSM_WAKE_PORT , NB_PSM_WAKE_PIN, GPIO_PIN_RESET) //高电平复位
//查询的状态信息
#define TASK_BUSY 0 //BUSY状态
#define TASK_IDLE 1 //IDLE状态
//数据发送相关
#define NBIOT_ING 0xA2 //发送中
#define NBIOT_ONLINE 0xA3 //NBIOT上线
#define NBIOT_SUCCESS 0xA4 //发送成功
#define NBIOT_ERROR 0xA5 //发送失败
//查询CSQ相关
#define CSQ_ING 0xA5 //查询中
#define CSQ_SUCCESS 0xA6 //查询成功
#define CSQ_ERROR 0xA7 //查询失败
//查询SNR相关
#define ECL_SNR_ING 0xA5 //查询中
#define ECL_SNR_SUCCESS 0xA6 //查询成功
#define ECL_SNR_ERROR 0xA7 //查询失败
//读取UDP数据相关
#define QIRD_ING 0xAA //查询中
#define QIRD_SUCCESS 0xAB //查询成功
#define QIRD_ERROR 0xAC //查询失败
//固件升级相关
#define FRIMWARE_UPDATE_ING 0xA5 //查询中
#define FRIMWARE_UPDATE_SUCCESS 0xA6 //查询成功
#define FRIMWARE_UPDATE_ERROR 0xA7 //查询失败
//查询ICCID相关
#define ICCID_ING 0xA5 //查询中
#define ICCID_SUCCESS 0xA6 //查询成功
#define ICCID_ERROR 0xA7 //查询失败
#define ICCID_LEN 0x14 //长度
//查询RSRP相关
#define RSRP_ING 0xA5 //查询中
#define RSRP_SUCCESS 0xA6 //查询成功
#define RSRP_ERROR 0xA7 //查询失败
#define RSRP_LEN 0x14 //长度
//任务完成情况
#define TASK_FAIL 0xA8
#define TASK_SUCCESS 0xA9
#define TASK_INIT 0xB0
//任务模式
#define ONLINE_MODE 0xB1 //NBIOT上线任务
#define SEND_MODE 0xB2 //NBIOT发送数据任务
#define READ_CSQ 0xB3 //NBIOT查信号值任务
#define READ_ICCID 0xB4 //NBIOT查CCID任务
#define NO_NBIOT_TASK 0xB5 //没有NBIOT任务
#define READ_ECL_SNR 0xB6 //没有NBIOT任务
//NBIOT网络状态
#define NB_ON_LINE 0x01 //在线
#define NB_OFF_LINE 0x00 //不在线
#define CONNECT_ON_LINE 0x01
#define CONNECT_OFF_LINE 0x00
//工作模式
#define NBIOT_ALWAYS_ON_LINE_MODE 0x81 //一直在线模式
#define NBIOT_TIME_ON_LINE_MODE 0x80 //阶段一直在线模式在线模式
//NBIOT掉线原因
#define NBIOT_OFFLINE_CLEAR 0x00 //清除掉线原因
#define NBIOT_OFFLINE_PARA_CHANGE 0x01 //参数更改
#define NBIOT_OFFLINE_STATION_CUT 0x02 //主站下线
#define NBIOT_OFFLINE_SPARE_STATION_START 0x03 //启动备站
#define NBIOT_OFFLINE_SPARE_STATION_CLOSE 0x04 //关闭备站
#define NBIOT_OFFLINE_OPEN_APN 0x05 //开启APN
//主状态机中的状态号
#define NBIOT_S_IDLE 0 //空闲状态
#define NBIOT_POWER_INIT 1 //NBIOT模块初始化
#define NBIOT_NET_OPEN 2 //配置网络
#define NBIOT_COAPorONENET_OPEN 3 //打开TCP连接
#define NBIOT_COAPorONENET_DATA_SEND 4 //发送数据
#define NBIOT_TCP_CLOSE 5 //关闭TCP连接
#define NBIOT_NET_CLOSE 6 //关闭NBIOT
#define NBIOT_POWER_OFF 7 //模块关机
#define NBIOT_HEART_FRAME 8 //发送心跳帧
#define NBIOT_READ_CSQ 9 //读信号值
#define NBIOT_READ_ICCID 10 //读ICCID
#define NBIOT_DATA_REV 11 //NBIOT数据接收
#define NBIOT_READ_ECL_SNR 12 //读取RSRP
#define NBIOT_READ_RCV 13
#define NBIOT_READ_DATE_TIME 14
#define NBIOT_READ_UDP_DATA 15
#define NBIOT_UDP_OPEN 16 //打开UDP连接
#define UDP_DATA_SEND 17 //发送UDP数据
#define NBIOT_TCP_OPEN 18 //打开TCP连接
#define NBIOT_DATA_SEND 19 //发送数据
#define NBIOT_REV_ACK 20
#define TCP_DATA_SEND 21 //发送TCP数据
//初始化状态机状态号
#define S_START 0 //初始状态
#define S_POWER_ON_LOW 1 //开机电平相关：高-低-高
#define S_POWER_ON_WAIT 2 //开机电平相关：高-低-高
#define S_ATS 3 //发送初始化AT指令
#define S_ATS_R 4 //判断初始化AT指令返回状态
#define S_CHECK_CGATT 5 //Query whether network is activated
#define S_CHECK_CGATT_WAIT 6 //Check whether network is activated
#define S_CHECK_CEREG 7 //发送查询网络注册信息 AT指令
#define S_CHECK_CEREG_WAIT 8 //判断查询网络注册信息 AT指令
#define S_CHECK_CSCON 9 //Query the signaling connection status
#define S_CHECK_CSCON_WAIT 10 //Check the signaling connection status
//附着NBIOT网络状态机状态号
#define S_CHECK_CIMI 1 //发送查询IMSI AT指令
#define S_CHECK_CIMI_WAIT 2 //判断查询IMSI AT指令返回状态
#define S_AT_CGDCONT 3 //设置APN
#define S_AT_CGDCONT_R 4 //判断APN是否设置成功
//接收数据状态号
#define S_AT_NSORF 1 //读取数据
#define S_AT_NSORF_R 2 //判断是否读取数据成功
//关闭TCP/IP状态机状态号
#define S_AT_NSOCL 1 //关闭TCP/IP连接
#define S_AT_NSOCL_R 2 //判断TCP/IP是否关闭成功
//关闭NBIOT网络状态机状态号
#define S_POWER_OFF_START 0
#define S_AT_NETCLOSE 1 //关闭NBIOT网络
#define S_AT_NETCLOSE_R 2 //判断NBIOT网络是否关闭成功
#define S_AT_QPOWD 3
#define S_AT_QPOWD_R 4
#define S_AT_CFUN0 7
#define S_AT_CFUN0_R 8
#define S_AT_NCSEARFCN 9
#define S_AT_NCSEARFCN_R 10
#define S_AT_CFUN1 11
#define S_AT_CFUN1_R 12
#define S_POWER_OFF 13
#define S_POWER_OFF_WAIT 14
#define S_AT_MIPLCLOSE 15 //关闭onenet网络
#define S_AT_MIPLCLOSE_R 16 //判断onenet网络是否关闭成功
#define S_AT_MIPLDELOBJ 17 //判断onenet网络是否关闭成功
#define S_AT_MIPLDELOBJ_R 18 //判断onenet网络是否关闭成功
#define S_AT_MIPLDEL 19 //判断onenet网络是否关闭成功
#define S_AT_MIPLDEL_R 20 //判断onenet网络是否关闭成功
//关机状态机状态号
#define S_AT_COPS 24 //判断网络是否注销成功
#define S_AT_COPS_R 25 //发送关机指令
//#define S_POWER_OFF 26
//#define S_POWER_OFF_WAIT 27
//读取信号值状态号
#define S_AT_CSQ 28
#define S_AT_CSQ_R 29
#define CSQ_READ_NUM 4 //信号值读取次数
//读取ECL、SNR
#define S_AT_ECL 30
#define S_AT_ECL_R 31
//读取UDP数据
#define S_AT_QIRD 1
#define S_AT_QIRD_R 2
//备站状态
#define OPEN_SPARE_STATION 0x01
#define CLOSE_SPARE_STATION 0x00
//通信模式选择
#define SIM_CARD_TELECOM 0x00 //电信卡
#define SIM_CARD_MOBILE 0X01 //移动卡
//
//OnenetConnectMachine使用的状态
#define S_ONENET_CONNECT_IDLE 0
#define S_ONENET_CONNECT_START 1
#define S_ONENET_MIPLCONFIG 2
#define S_ONENET_MIPLCONFIG_R 3
#define S_ONENET_MIPLCONFIG_CK 4
#define S_ONENET_MIPLCONFIG_CK_R 5
#define S_ONENET_MIPLCREATE 6
#define S_ONENET_MIPLCREATE_R 7
#define S_ONENET_MIPLADDOBJ 8
#define S_ONENET_MIPLADDOBJ_R 9
#define S_ONENET_MIPLOPEN 10
#define S_ONENET_MIPLOPEN_R 11
#define S_ONENET_MIPLOBSERVE 12
#define S_ONENET_MIPLOBSERVE_R 13
#define S_ONENET_MIPLDISCOVER 14
#define S_ONENET_MIPLDISCOVER_R 15
#define S_ONENET_ECL 16
#define S_ONENET_ECL_R 17
#define S_ONENET_CCLK 18
#define S_ONENET_CCLK_R 19
#define S_ONENET_Wait 20
#define S_ONENET_MIPLCONFIG3 21
#define S_ONENET_MIPLCONFIG3_R 22
//连接通信协议
#define NBIOT_CONNECT_COAP 0
#define NBIOT_CONNECT_UDP1 1
#define NBIOT_CONNECT_UDP2 2
//#define NBIOT_CONNECT_TCP1 3
#define SEND_TYPE_COAP 0
#define SEND_TYPE_UDP1 1
#define SEND_TYPE_UDP2 2
//#define SEND_TYPE_TCP1 3
//******************************* 结构体定义*************************************
//参数空间
#ifndef APN_SIZE
#define APN_SIZE 32
#endif
typedef struct
{
u8 *work_mode; //工作模式，一直在线模式还是时段在线模式
u8 *ip; //IP
u8 *spare_ip; //备用IP
u8 *port; //端口号
u8 *spare_port; //备用端口号
u8 *apn; //APN
} CFIG_PARA;
//NBIOT消息
typedef union
{
struct
{
u8 para_change : 1; //参数改变
u8 station_close : 1; //主站下线
u8 open_spare_station : 1; //开启备站
u8 close_spare_station : 1; //关闭备站
u8 apn_open : 1; //APN开启
u8 rev_data : 1; //收到数据
} s;
u8 info;
} NBIOT_MSG;
//NBIOT相关参数
typedef struct
{
CFIG_PARA cfig_para; //可配置参数
u8 csq; //信号值
u8 net_state; //网络状态
u8 offline_reason; //掉线原因
u8 Telecom; //运营商
u8 spare_station; //备站
u8 coap_state;
u8 udp1_state;
u8 udp2_state;
//u8 tcp1_state;
char imei[16];//IMEI号码为15 BIT阿拉伯数字 最后一字节为结束符 “\0”
char imsi[16];//IMSI号码为15 BIT阿拉伯数字 最后一字节为结束符 “\0”
char iccid[21];//ICCID为20位 数字或者大写字符
} NBIOT_PARA;
//数据发送相关
typedef struct
{
u8 *state; //发送申请指针msg
u8 *buf; //发送数据指针
u16 len; //发送长度
} NBIOT_SEND_DATA;
//******************************* 外部变量***************************************
extern NBIOT_PARA Nbiot_Para;
extern NBIOT_MSG Nbiot_Msg;
//******************************* 外部接口函数***********************************
void NbiotOnlineTask(u8 *state);
void NbiotSendTask(u8 *addr, u16 len, u8 send_type,u8 *state);
void NbiotUdpOpenTask(void);
void NbiotReadECLSNRTask(u8 *state);
void NB_NetConnectStart(unsigned char* temp_ip, u16 temp_port, u8 connect_type);
u8 ConncetIfOnline(u8 connect_type);
void StartNbiotSendData(void);
u8 getNB_NetConnectType(void);
u32 sys_get_net_state (void);
u8 NbiotIfIdle(void);
u8 NbiotIfOnline(void);
u8 NbiotIfSleep(void);
void NbiotPreSleep(void);
void NbiotWakeSleep(void);
void NbiotGetCcidTask(u8 **ccid, u8 *state);
void NbiotMainMachine(void);
u8 If_NB_Poweron(void);
void StartPowerOffTask(void);
void set_ip_port(void);
void NbForcePowerOff(void);
u8 GetNbiotSendType(void);
u8 UdpIfOnline(void);
void TcpStartConnect(void);
u8 TcpIfOnline(void);
void StartTcpSendData(void);
//初始化状态机状态号
#define S_INIT_POWER_ON 0 //模块送电
#define S_INIT_RESET_LOW 1 //开始复位模块
#define S_INIT_RESET_HIGH 2 //模块完成复位
#define S_INIT_POWER_ON_WAIT 3 //等待模块搜网注册
#define S_INIT_ATS 4 //发送初始化AT指令
#define S_INIT_ATS_R 5 //判断初始化AT指令返回状态
#define S_INIT_CMEE 6 //打开ERROR错误代码显示
#define S_INIT_CMEE_R 7 //打开ERROR错误代码显示返回状态
#define S_TCP_CPSMS 8 //关闭PSM模式
#define S_TCP_CPSMS_R 9
#define S_TCP_NPTWEDRXS 10 //关闭eDRX模式
#define S_TCP_NPTWEDRXS_R 11
#define S_INIT_ASK_IMEI 12 //查询IMEI
#define S_INIT_ASK_IMEI_R 13 //查询IMEI返回状态
#define S_INIT_ASK_CIMI 14 //查询CIMI
#define S_INIT_ASK_CIMI_R 15 //查询CIMI返回状态
#define S_INIT_ASK_CSQ 16 //查询CSQ
#define S_INIT_ASK_CSQ_R 17 //查询CSQ返回状态
#define S_INIT_ASK_CEREG 18 //查询CEREG
#define S_INIT_ASK_CEREG_R 19 //查询CEREG返回状态
#define S_INIT_ASK_CGATT 20 //查询CGATT
#define S_INIT_ASK_CGATT_R 21 //查询CGATT返回状态
#define S_INIT_ASK_ICCID 22 //查询SIM卡的ICCID
#define S_INIT_ASK_ICCID_R 23
#define S_INIT_AT_CGDCONT 24 //配置网络参数
#define S_INIT_AT_CGDCONT_R 25
#define S_INIT_AT_ECCESQS 26 //关闭信号主动通知
#define S_INIT_AT_ECCESQS_R 27
#define S_INIT_AT_ECSTATUS 28 //查询信号相关参数
#define S_INIT_AT_ECSTATUS_R 29
#define S_INIT_AT_READ_APN 30
#define S_INIT_AT_READ_APN_R 31
#define S_INIT_PWRKEY_LOW 32 //开始复位模块
#define S_INIT_PWRKEY_HIGH 33 //模块完成复位
#define S_INIT_CFUN0 34
#define S_INIT_CFUN0_R 35
#define S_INIT_CFUN1 36
#define S_INIT_CFUN1_R 37
//TCP链接状态机
//#define S_COAP_CONNECT_START 0 //
//#define S_TCP_CONNECT_DEL 1 //删除以前的链接
//#define S_TCP_CONNECT_START 0 //模块送电
//#define S_UDP_CONNECT_START 0
#define SEND_TYPE_COAP 0
#define SEND_TYPE_UDP 1
//CoapConnectMachine
#define S_COAP_CONNECT_START 0
#define S_COAP_NCDP 1
#define S_COAP_NCDP_R 2
#define S_COAP_NCDP_CK 3
#define S_COAP_NCDP_CK_R 4
#define S_COAP_Wait 5
#define S_COAP_ECL 6 //读取ECL、SNR
#define S_COAP_ECL_R 7
#define S_COAP_CCLK 8 //查询网络时间
#define S_COAP_CCLK_R 9 //查询网络时间返回状态
//UdpConnectMachine
#define S_UDP_CONNECT_START 0
#define S_UDP_QIOPEN 1
#define S_UDP_QIOPEN_R 2
#define S_UDP_NCDP_CK 3
#define S_UDP_NCDP_CK_R 4
#define S_UDP_Wait 5
//onenet指令集
#define S_TCP_MIPLCONFIG 1
#define S_TCP_MIPLCONFIG_R 2
#define S_TCP_MIPLCREATE 3 //配置登录信息
#define S_TCP_MIPLCREATE_R 4 //删除以前的链接返回状态
#define S_TCP_MIPLADDOBJ 5 //定制对象
#define S_TCP_MIPLADDOBJ_R 6 //定制对象返回状态
#define S_TCP_MIPLDISCOVERRSP 7 //订阅资源
#define S_TCP_MIPLDISCOVERRSP_R 8 //订阅资源返回状态
#define S_TCP_MIPLOPEN 9
#define S_TCP_MIPLOPEN_R 10
#define S_TCP_WAIT_DISCOVER 11
#define S_TCP_ACK_DISCOVER 12
//
#define S_TCP_CONNECT_MIPLCONF 12 //配置登录信息
#define S_TCP_CONNECT_MIPLCONF_R 13 //配置登录信息返回状态
//CT_WING 平台指令集 E7025
#define S_AT_CTM2MSET 1
#define S_AT_CTM2MSET_R 2
#define S_AT_CTM2MREG 3
#define S_AT_CTM2MREG_R 4
#define S_AT_COAP_CCLK 5 //查询网络时间
#define S_AT_COAP_CCLK_R 6 //查询网络时间返回状态
//发送数据状态机
#define S_SEND_START 0
#define S_SEND_AT 1
#define S_SEND_AT_R 2
#define S_SEND_DATA 3
#define S_SEND_DATA_R 4
//ONENET 应答MIPLWRITE状态机
#define S_ONENET_ACKREV_IDLE 0
#define S_ONENET_ACKREV_START 1
#define S_ONENET_REPLY_REV_ACKID 2 //应答接收到数据
#define S_ONENET_REPLY_REV_ACKID_R 3 //应答接收到数据--等待响应*/
//关闭onenet网络状态机状态号
//#define S_AT_MIPLCLOSE 1 //关闭onenet网络
//#define S_AT_MIPLCLOSE_R 2 //判断onenet网络是否关闭成功
//#define S_AT_MIPLDELOBJ 3 //判断onenet网络是否关闭成功
//#define S_AT_MIPLDELOBJ_R 4 //判断onenet网络是否关闭成功
//#define S_AT_MIPLDEL 5 //判断onenet网络是否关闭成功
//#define S_AT_MIPLDEL_R 6 //判断onenet网络是否关闭成功
//#define S_AT_CFUN0 7
//#define S_AT_CFUN0_R 8
//#define S_AT_NCSEARFCN 9
//#define S_AT_NCSEARFCN_R 10
//#define S_AT_CFUN1 11
//#define S_AT_CFUN1_R 12
//#define S_POWER_OFF 13
//#define S_POWER_OFF_WAIT 14
#define NUM_AT_ERROR 10 //5
#define NUM_AT_CMEE_ERROR 10 //5
#define NUM_AT_CIMI_ERROR 10 //5
#define NUM_AT_IMEI_ERROR 10 //5
#define NUM_AT_ICCID_ERROR 10 //5
#define NUM_AT_CSQ_ERROR 10
#define NUM_AT_CGATT_ERROR 30
#define NUM_AT_CCLK_ERROR 5
#define NUM_AT_CTM2MSET_ERROR 5
#define NUM_AT_CTM2MREG_ERROR 5
//#define NUM_AT_NNMI_ERROR 5 //5
#define NUM_AT_CPSMS_ERROR 5 //5
#define NUM_AT_MIPLDEL_ERROR 2 //5
#define NUM_AT_MIPLCREATE_ERROR 5 //5
#define NUM_AT_MIPLCONF_ERROR 5 //5
#define NUM_AT_MIPLADDOBJ_ERROR 5 //5
#define NUM_AT_MIPLOPEN_ERROR 5 //5
#define NUM_AT_MIPLOBSERVERSP_ERROR 5 //5
#define NUM_AT_MIPLDISCOVERRSP_ERROR 5 //5
#define NUM_AT_MIPLNOTIFY_ERROR 5 //5
#define NUM_AT_MIPLOPEN_ERROR 5 //5
#define NUM_AT_MIPLWRITE_ERROR 5 //5
#define NUM_AT_MIPLCLOSE_ERROR 2 //5
#define NUM_AT_CFUN_ERROR 3 //5
#define NUM_AT_NCSEARFCN_ERROR 3 //5
#define NUM_AT_NPTWEDRXS_ERROR 3 //5
#define AT_COMMAND_SEND_INTERVAL_TIME 500 //mS
#define AT_COMMAND_RECEIVE_WAIT_TIME 1000 //mS
#endif
#endif
Reference in New Issue View Git Blame Copy Permalink