/************************************************************************************ * @Copyright (c) :(C)2017, Qindao ieslab Co., Ltd * @FileName :nb_driver_bc25.h * @Author :QDIES PLATFORM TEAM * @Version :V1.0 * @Date :2020-8-13 * @Description : ************************************************************************************/ #ifndef __NB_DRIVER_E7025_H #define __NB_DRIVER_E7025_H #include "sys_config.h" #ifdef NB_MODULE_E7025 #include "type.h" #include /*----采用宏定义 AT_ORDER_SET 来指定走哪个指令集--*/ //#define M_5310_N 0 //M5310 普通指令集 //#define M_5310_A 1 //M5310A 指令集 //#define AT_ORDER_SET M_5310_A /*------为了简化程序 暂时没有合成到一起----------*/ /*-------模块登录服务器IP表示形式--- *----IP_PORT IP形式 *----DOMAIN_NAME 域名形式 默认域名模式 *----BOOTSTRAP_ENABLE 启动模式 0-接入机模式 1-引导机模式 *----接入机模式 IP：183.230.40.40:5683 域名:nbiotacc.heclouds.com:5683 *----引导机模式 IP：183.230.40.39:5683 域名:nbiotbt.heclouds.com:5683 -----------------------------------*/ //#define IP_PORT_TYPE 0 //#define DOMAIN_NAME_TYPE 1 //#define SEVER_IP_TYPE DOMAIN_NAME_TYPE //#define BOOTSTRAP_ENABLE 0 /*--------------------------------------*/ /*-----设置是否打开GSM网络校时-------- * 1---打开 默认打开 * 0---关闭 */ /*------------------------------------*/ /*-----设置发送数据是否打开ACK-------- * 1---打开 * 0---关闭 默认关闭 */ #define SEND_ACKID_ENABLE 0 /*------------------------------------*/ #if (HARDWARE_VERSION==0x14)//方壳表 #define RSTN_NB_PORT (GpioPortF) #define RSTN_NB_PIN (GpioPin0) #define BAT_NB_PORT (GpioPortE) #define BAT_NB_PIN (GpioPin4) #define PWR_NB_PORT (GpioPortF) #define PWR_NB_PIN (GpioPin1) #define NB_PSM_WAKE_PORT (GpioPortA) #define NB_PSM_WAKE_PIN (GpioPin2) #elif (HARDWARE_VERSION==0x18)//圆壳表 #define RSTN_NB_PORT (GpioPortE) #define RSTN_NB_PIN (GpioPin4) #define BAT_NB_PORT (GpioPortE) #define BAT_NB_PIN (GpioPin5) #define PWR_NB_PORT (GpioPortE) #define PWR_NB_PIN (GpioPin2) #define NB_PSM_WAKE_PORT (GpioPortE) #define NB_PSM_WAKE_PIN (GpioPin3) #endif #define RSTN_NB_LOW() Gpio_WriteOutputIO(RSTN_NB_PORT, RSTN_NB_PIN, GPIO_PIN_SET) #define RSTN_NB_HIG() Gpio_WriteOutputIO(RSTN_NB_PORT, RSTN_NB_PIN, GPIO_PIN_RESET) //高电平复位 #define BAT_NB_DISABLE() Gpio_WriteOutputIO(BAT_NB_PORT, BAT_NB_PIN, GPIO_PIN_RESET) #define BAT_NB_ENABLE() Gpio_WriteOutputIO(BAT_NB_PORT, BAT_NB_PIN, GPIO_PIN_SET) #define PWR_NB_LOW() Gpio_WriteOutputIO(PWR_NB_PORT, PWR_NB_PIN, GPIO_PIN_SET) #define PWR_NB_HIG() Gpio_WriteOutputIO(PWR_NB_PORT, PWR_NB_PIN, GPIO_PIN_RESET) #define NB_PSM_WAKE_LOW() Gpio_WriteOutputIO(NB_PSM_WAKE_PORT , NB_PSM_WAKE_PIN, GPIO_PIN_SET) #define NB_PSM_WAKE_HIG() Gpio_WriteOutputIO(NB_PSM_WAKE_PORT , NB_PSM_WAKE_PIN, GPIO_PIN_RESET) //高电平复位 //查询的状态信息 #define TASK_BUSY 0 //BUSY状态 #define TASK_IDLE 1 //IDLE状态 //数据发送相关 #define NBIOT_ING 0xA2 //发送中 #define NBIOT_ONLINE 0xA3 //NBIOT上线 #define NBIOT_SUCCESS 0xA4 //发送成功 #define NBIOT_ERROR 0xA5 //发送失败 //查询CSQ相关 #define CSQ_ING 0xA5 //查询中 #define CSQ_SUCCESS 0xA6 //查询成功 #define CSQ_ERROR 0xA7 //查询失败 //查询SNR相关 #define ECL_SNR_ING 0xA5 //查询中 #define ECL_SNR_SUCCESS 0xA6 //查询成功 #define ECL_SNR_ERROR 0xA7 //查询失败 //读取UDP数据相关 #define QIRD_ING 0xAA //查询中 #define QIRD_SUCCESS 0xAB //查询成功 #define QIRD_ERROR 0xAC //查询失败 //固件升级相关 #define FRIMWARE_UPDATE_ING 0xA5 //查询中 #define FRIMWARE_UPDATE_SUCCESS 0xA6 //查询成功 #define FRIMWARE_UPDATE_ERROR 0xA7 //查询失败 //查询ICCID相关 #define ICCID_ING 0xA5 //查询中 #define ICCID_SUCCESS 0xA6 //查询成功 #define ICCID_ERROR 0xA7 //查询失败 #define ICCID_LEN 0x14 //长度 //查询RSRP相关 #define RSRP_ING 0xA5 //查询中 #define RSRP_SUCCESS 0xA6 //查询成功 #define RSRP_ERROR 0xA7 //查询失败 #define RSRP_LEN 0x14 //长度 //任务完成情况 #define TASK_FAIL 0xA8 #define TASK_SUCCESS 0xA9 #define TASK_INIT 0xB0 //任务模式 #define ONLINE_MODE 0xB1 //NBIOT上线任务 #define SEND_MODE 0xB2 //NBIOT发送数据任务 #define READ_CSQ 0xB3 //NBIOT查信号值任务 #define READ_ICCID 0xB4 //NBIOT查CCID任务 #define NO_NBIOT_TASK 0xB5 //没有NBIOT任务 #define READ_ECL_SNR 0xB6 //没有NBIOT任务 //NBIOT网络状态 #define NB_ON_LINE 0x01 //在线 #define NB_OFF_LINE 0x00 //不在线 #define CONNECT_ON_LINE 0x01 #define CONNECT_OFF_LINE 0x00 //工作模式 #define NBIOT_ALWAYS_ON_LINE_MODE 0x81 //一直在线模式 #define NBIOT_TIME_ON_LINE_MODE 0x80 //阶段一直在线模式在线模式 //NBIOT掉线原因 #define NBIOT_OFFLINE_CLEAR 0x00 //清除掉线原因 #define NBIOT_OFFLINE_PARA_CHANGE 0x01 //参数更改 #define NBIOT_OFFLINE_STATION_CUT 0x02 //主站下线 #define NBIOT_OFFLINE_SPARE_STATION_START 0x03 //启动备站 #define NBIOT_OFFLINE_SPARE_STATION_CLOSE 0x04 //关闭备站 #define NBIOT_OFFLINE_OPEN_APN 0x05 //开启APN //主状态机中的状态号 #define NBIOT_S_IDLE 0 //空闲状态 #define NBIOT_POWER_INIT 1 //NBIOT模块初始化 #define NBIOT_NET_OPEN 2 //配置网络 #define NBIOT_COAPorONENET_OPEN 3 //打开TCP连接 #define NBIOT_COAPorONENET_DATA_SEND 4 //发送数据 #define NBIOT_TCP_CLOSE 5 //关闭TCP连接 #define NBIOT_NET_CLOSE 6 //关闭NBIOT #define NBIOT_POWER_OFF 7 //模块关机 #define NBIOT_HEART_FRAME 8 //发送心跳帧 #define NBIOT_READ_CSQ 9 //读信号值 #define NBIOT_READ_ICCID 10 //读ICCID #define NBIOT_DATA_REV 11 //NBIOT数据接收 #define NBIOT_READ_ECL_SNR 12 //读取RSRP #define NBIOT_READ_RCV 13 #define NBIOT_READ_DATE_TIME 14 #define NBIOT_READ_UDP_DATA 15 #define NBIOT_UDP_OPEN 16 //打开UDP连接 #define UDP_DATA_SEND 17 //发送UDP数据 #define NBIOT_TCP_OPEN 18 //打开TCP连接 #define NBIOT_DATA_SEND 19 //发送数据 #define NBIOT_REV_ACK 20 #define TCP_DATA_SEND 21 //发送TCP数据 //初始化状态机状态号 #define S_START 0 //初始状态 #define S_POWER_ON_LOW 1 //开机电平相关：高-低-高 #define S_POWER_ON_WAIT 2 //开机电平相关：高-低-高 #define S_ATS 3 //发送初始化AT指令 #define S_ATS_R 4 //判断初始化AT指令返回状态 #define S_CHECK_CGATT 5 //Query whether network is activated #define S_CHECK_CGATT_WAIT 6 //Check whether network is activated #define S_CHECK_CEREG 7 //发送查询网络注册信息 AT指令 #define S_CHECK_CEREG_WAIT 8 //判断查询网络注册信息 AT指令 #define S_CHECK_CSCON 9 //Query the signaling connection status #define S_CHECK_CSCON_WAIT 10 //Check the signaling connection status //附着NBIOT网络状态机状态号 #define S_CHECK_CIMI 1 //发送查询IMSI AT指令 #define S_CHECK_CIMI_WAIT 2 //判断查询IMSI AT指令返回状态 #define S_AT_CGDCONT 3 //设置APN #define S_AT_CGDCONT_R 4 //判断APN是否设置成功 //接收数据状态号 #define S_AT_NSORF 1 //读取数据 #define S_AT_NSORF_R 2 //判断是否读取数据成功 //关闭TCP/IP状态机状态号 #define S_AT_NSOCL 1 //关闭TCP/IP连接 #define S_AT_NSOCL_R 2 //判断TCP/IP是否关闭成功 //关闭NBIOT网络状态机状态号 #define S_POWER_OFF_START 0 #define S_AT_NETCLOSE 1 //关闭NBIOT网络 #define S_AT_NETCLOSE_R 2 //判断NBIOT网络是否关闭成功 #define S_AT_QPOWD 3 #define S_AT_QPOWD_R 4 #define S_AT_CFUN0 7 #define S_AT_CFUN0_R 8 #define S_AT_NCSEARFCN 9 #define S_AT_NCSEARFCN_R 10 #define S_AT_CFUN1 11 #define S_AT_CFUN1_R 12 #define S_POWER_OFF 13 #define S_POWER_OFF_WAIT 14 #define S_AT_MIPLCLOSE 15 //关闭onenet网络 #define S_AT_MIPLCLOSE_R 16 //判断onenet网络是否关闭成功 #define S_AT_MIPLDELOBJ 17 //判断onenet网络是否关闭成功 #define S_AT_MIPLDELOBJ_R 18 //判断onenet网络是否关闭成功 #define S_AT_MIPLDEL 19 //判断onenet网络是否关闭成功 #define S_AT_MIPLDEL_R 20 //判断onenet网络是否关闭成功 //关机状态机状态号 #define S_AT_COPS 24 //判断网络是否注销成功 #define S_AT_COPS_R 25 //发送关机指令 //#define S_POWER_OFF 26 //#define S_POWER_OFF_WAIT 27 //读取信号值状态号 #define S_AT_CSQ 28 #define S_AT_CSQ_R 29 #define CSQ_READ_NUM 4 //信号值读取次数 //读取ECL、SNR #define S_AT_ECL 30 #define S_AT_ECL_R 31 //读取UDP数据 #define S_AT_QIRD 1 #define S_AT_QIRD_R 2 //备站状态 #define OPEN_SPARE_STATION 0x01 #define CLOSE_SPARE_STATION 0x00 //通信模式选择 #define SIM_CARD_TELECOM 0x00 //电信卡 #define SIM_CARD_MOBILE 0X01 //移动卡 // //OnenetConnectMachine使用的状态 #define S_ONENET_CONNECT_IDLE 0 #define S_ONENET_CONNECT_START 1 #define S_ONENET_MIPLCONFIG 2 #define S_ONENET_MIPLCONFIG_R 3 #define S_ONENET_MIPLCONFIG_CK 4 #define S_ONENET_MIPLCONFIG_CK_R 5 #define S_ONENET_MIPLCREATE 6 #define S_ONENET_MIPLCREATE_R 7 #define S_ONENET_MIPLADDOBJ 8 #define S_ONENET_MIPLADDOBJ_R 9 #define S_ONENET_MIPLOPEN 10 #define S_ONENET_MIPLOPEN_R 11 #define S_ONENET_MIPLOBSERVE 12 #define S_ONENET_MIPLOBSERVE_R 13 #define S_ONENET_MIPLDISCOVER 14 #define S_ONENET_MIPLDISCOVER_R 15 #define S_ONENET_ECL 16 #define S_ONENET_ECL_R 17 #define S_ONENET_CCLK 18 #define S_ONENET_CCLK_R 19 #define S_ONENET_Wait 20 #define S_ONENET_MIPLCONFIG3 21 #define S_ONENET_MIPLCONFIG3_R 22 //连接通信协议 #define NBIOT_CONNECT_COAP 0 #define NBIOT_CONNECT_UDP1 1 #define NBIOT_CONNECT_UDP2 2 //#define NBIOT_CONNECT_TCP1 3 #define SEND_TYPE_COAP 0 #define SEND_TYPE_UDP1 1 #define SEND_TYPE_UDP2 2 //#define SEND_TYPE_TCP1 3 //******************************* 结构体定义************************************* //参数空间 #ifndef APN_SIZE #define APN_SIZE 32 #endif typedef struct { u8 *work_mode; //工作模式，一直在线模式还是时段在线模式 u8 *ip; //IP u8 *spare_ip; //备用IP u8 *port; //端口号 u8 *spare_port; //备用端口号 u8 *apn; //APN } CFIG_PARA; //NBIOT消息 typedef union { struct { u8 para_change : 1; //参数改变 u8 station_close : 1; //主站下线 u8 open_spare_station : 1; //开启备站 u8 close_spare_station : 1; //关闭备站 u8 apn_open : 1; //APN开启 u8 rev_data : 1; //收到数据 } s; u8 info; } NBIOT_MSG; //NBIOT相关参数 typedef struct { CFIG_PARA cfig_para; //可配置参数 u8 csq; //信号值 u8 net_state; //网络状态 u8 offline_reason; //掉线原因 u8 Telecom; //运营商 u8 spare_station; //备站 u8 coap_state; u8 udp1_state; u8 udp2_state; //u8 tcp1_state; char imei[16];//IMEI号码为15 BIT阿拉伯数字 最后一字节为结束符 “\0” char imsi[16];//IMSI号码为15 BIT阿拉伯数字 最后一字节为结束符 “\0” char iccid[21];//ICCID为20位 数字或者大写字符 } NBIOT_PARA; //数据发送相关 typedef struct { u8 *state; //发送申请指针msg u8 *buf; //发送数据指针 u16 len; //发送长度 } NBIOT_SEND_DATA; //******************************* 外部变量*************************************** extern NBIOT_PARA Nbiot_Para; extern NBIOT_MSG Nbiot_Msg; //******************************* 外部接口函数*********************************** void NbiotOnlineTask(u8 *state); void NbiotSendTask(u8 *addr, u16 len, u8 send_type,u8 *state); void NbiotUdpOpenTask(void); void NbiotReadECLSNRTask(u8 *state); void NB_NetConnectStart(unsigned char* temp_ip, u16 temp_port, u8 connect_type); u8 ConncetIfOnline(u8 connect_type); void StartNbiotSendData(void); u8 getNB_NetConnectType(void); u32 sys_get_net_state (void); u8 NbiotIfIdle(void); u8 NbiotIfOnline(void); u8 NbiotIfSleep(void); void NbiotPreSleep(void); void NbiotWakeSleep(void); void NbiotGetCcidTask(u8 **ccid, u8 *state); void NbiotMainMachine(void); u8 If_NB_Poweron(void); void StartPowerOffTask(void); void set_ip_port(void); void NbForcePowerOff(void); u8 GetNbiotSendType(void); u8 UdpIfOnline(void); void TcpStartConnect(void); u8 TcpIfOnline(void); void StartTcpSendData(void); //初始化状态机状态号 #define S_INIT_POWER_ON 0 //模块送电 #define S_INIT_RESET_LOW 1 //开始复位模块 #define S_INIT_RESET_HIGH 2 //模块完成复位 #define S_INIT_POWER_ON_WAIT 3 //等待模块搜网注册 #define S_INIT_ATS 4 //发送初始化AT指令 #define S_INIT_ATS_R 5 //判断初始化AT指令返回状态 #define S_INIT_CMEE 6 //打开ERROR错误代码显示 #define S_INIT_CMEE_R 7 //打开ERROR错误代码显示返回状态 #define S_TCP_CPSMS 8 //关闭PSM模式 #define S_TCP_CPSMS_R 9 #define S_TCP_NPTWEDRXS 10 //关闭eDRX模式 #define S_TCP_NPTWEDRXS_R 11 #define S_INIT_ASK_IMEI 12 //查询IMEI #define S_INIT_ASK_IMEI_R 13 //查询IMEI返回状态 #define S_INIT_ASK_CIMI 14 //查询CIMI #define S_INIT_ASK_CIMI_R 15 //查询CIMI返回状态 #define S_INIT_ASK_CSQ 16 //查询CSQ #define S_INIT_ASK_CSQ_R 17 //查询CSQ返回状态 #define S_INIT_ASK_CEREG 18 //查询CEREG #define S_INIT_ASK_CEREG_R 19 //查询CEREG返回状态 #define S_INIT_ASK_CGATT 20 //查询CGATT #define S_INIT_ASK_CGATT_R 21 //查询CGATT返回状态 #define S_INIT_ASK_ICCID 22 //查询SIM卡的ICCID #define S_INIT_ASK_ICCID_R 23 #define S_INIT_AT_CGDCONT 24 //配置网络参数 #define S_INIT_AT_CGDCONT_R 25 #define S_INIT_AT_ECCESQS 26 //关闭信号主动通知 #define S_INIT_AT_ECCESQS_R 27 #define S_INIT_AT_ECSTATUS 28 //查询信号相关参数 #define S_INIT_AT_ECSTATUS_R 29 #define S_INIT_AT_READ_APN 30 #define S_INIT_AT_READ_APN_R 31 #define S_INIT_PWRKEY_LOW 32 //开始复位模块 #define S_INIT_PWRKEY_HIGH 33 //模块完成复位 #define S_INIT_CFUN0 34 #define S_INIT_CFUN0_R 35 #define S_INIT_CFUN1 36 #define S_INIT_CFUN1_R 37 //TCP链接状态机 //#define S_COAP_CONNECT_START 0 // //#define S_TCP_CONNECT_DEL 1 //删除以前的链接 //#define S_TCP_CONNECT_START 0 //模块送电 //#define S_UDP_CONNECT_START 0 #define SEND_TYPE_COAP 0 #define SEND_TYPE_UDP 1 //CoapConnectMachine #define S_COAP_CONNECT_START 0 #define S_COAP_NCDP 1 #define S_COAP_NCDP_R 2 #define S_COAP_NCDP_CK 3 #define S_COAP_NCDP_CK_R 4 #define S_COAP_Wait 5 #define S_COAP_ECL 6 //读取ECL、SNR #define S_COAP_ECL_R 7 #define S_COAP_CCLK 8 //查询网络时间 #define S_COAP_CCLK_R 9 //查询网络时间返回状态 //UdpConnectMachine #define S_UDP_CONNECT_START 0 #define S_UDP_QIOPEN 1 #define S_UDP_QIOPEN_R 2 #define S_UDP_NCDP_CK 3 #define S_UDP_NCDP_CK_R 4 #define S_UDP_Wait 5 //onenet指令集 #define S_TCP_MIPLCONFIG 1 #define S_TCP_MIPLCONFIG_R 2 #define S_TCP_MIPLCREATE 3 //配置登录信息 #define S_TCP_MIPLCREATE_R 4 //删除以前的链接返回状态 #define S_TCP_MIPLADDOBJ 5 //定制对象 #define S_TCP_MIPLADDOBJ_R 6 //定制对象返回状态 #define S_TCP_MIPLDISCOVERRSP 7 //订阅资源 #define S_TCP_MIPLDISCOVERRSP_R 8 //订阅资源返回状态 #define S_TCP_MIPLOPEN 9 #define S_TCP_MIPLOPEN_R 10 #define S_TCP_WAIT_DISCOVER 11 #define S_TCP_ACK_DISCOVER 12 // #define S_TCP_CONNECT_MIPLCONF 12 //配置登录信息 #define S_TCP_CONNECT_MIPLCONF_R 13 //配置登录信息返回状态 //CT_WING 平台指令集 E7025 #define S_AT_CTM2MSET 1 #define S_AT_CTM2MSET_R 2 #define S_AT_CTM2MREG 3 #define S_AT_CTM2MREG_R 4 #define S_AT_COAP_CCLK 5 //查询网络时间 #define S_AT_COAP_CCLK_R 6 //查询网络时间返回状态 //发送数据状态机 #define S_SEND_START 0 #define S_SEND_AT 1 #define S_SEND_AT_R 2 #define S_SEND_DATA 3 #define S_SEND_DATA_R 4 //ONENET 应答MIPLWRITE状态机 #define S_ONENET_ACKREV_IDLE 0 #define S_ONENET_ACKREV_START 1 #define S_ONENET_REPLY_REV_ACKID 2 //应答接收到数据 #define S_ONENET_REPLY_REV_ACKID_R 3 //应答接收到数据--等待响应*/ //关闭onenet网络状态机状态号 //#define S_AT_MIPLCLOSE 1 //关闭onenet网络 //#define S_AT_MIPLCLOSE_R 2 //判断onenet网络是否关闭成功 //#define S_AT_MIPLDELOBJ 3 //判断onenet网络是否关闭成功 //#define S_AT_MIPLDELOBJ_R 4 //判断onenet网络是否关闭成功 //#define S_AT_MIPLDEL 5 //判断onenet网络是否关闭成功 //#define S_AT_MIPLDEL_R 6 //判断onenet网络是否关闭成功 //#define S_AT_CFUN0 7 //#define S_AT_CFUN0_R 8 //#define S_AT_NCSEARFCN 9 //#define S_AT_NCSEARFCN_R 10 //#define S_AT_CFUN1 11 //#define S_AT_CFUN1_R 12 //#define S_POWER_OFF 13 //#define S_POWER_OFF_WAIT 14 #define NUM_AT_ERROR 10 //5 #define NUM_AT_CMEE_ERROR 10 //5 #define NUM_AT_CIMI_ERROR 10 //5 #define NUM_AT_IMEI_ERROR 10 //5 #define NUM_AT_ICCID_ERROR 10 //5 #define NUM_AT_CSQ_ERROR 10 #define NUM_AT_CGATT_ERROR 30 #define NUM_AT_CCLK_ERROR 5 #define NUM_AT_CTM2MSET_ERROR 5 #define NUM_AT_CTM2MREG_ERROR 5 //#define NUM_AT_NNMI_ERROR 5 //5 #define NUM_AT_CPSMS_ERROR 5 //5 #define NUM_AT_MIPLDEL_ERROR 2 //5 #define NUM_AT_MIPLCREATE_ERROR 5 //5 #define NUM_AT_MIPLCONF_ERROR 5 //5 #define NUM_AT_MIPLADDOBJ_ERROR 5 //5 #define NUM_AT_MIPLOPEN_ERROR 5 //5 #define NUM_AT_MIPLOBSERVERSP_ERROR 5 //5 #define NUM_AT_MIPLDISCOVERRSP_ERROR 5 //5 #define NUM_AT_MIPLNOTIFY_ERROR 5 //5 #define NUM_AT_MIPLOPEN_ERROR 5 //5 #define NUM_AT_MIPLWRITE_ERROR 5 //5 #define NUM_AT_MIPLCLOSE_ERROR 2 //5 #define NUM_AT_CFUN_ERROR 3 //5 #define NUM_AT_NCSEARFCN_ERROR 3 //5 #define NUM_AT_NPTWEDRXS_ERROR 3 //5 #define AT_COMMAND_SEND_INTERVAL_TIME 500 //mS #define AT_COMMAND_RECEIVE_WAIT_TIME 1000 //mS #endif #endif