#include "sys_config.h" #if PRODUCT_BLE_SS #include "UWater_frame_app.h" #include "UWater_rtcc_app.h" #include "UWater_lcd_app.h" #include "UWater_pt_app.h" #include "UWater_frame_func_ReplyBLE.h" #include "UWater_encryption_driver.h" #include "UWater_DataTools_App.h" #include "UWater_uart_driver.h" #include "UWater_eeprom_driver.h" #include "UWater_power_app.h" #include "sys_processor.h" #include "UWater_valve_driver.h" #include "UWater_Valve_app.h" #include "UWater_power_app.h" #include "UWater_gp22_app.h" #include "UWater_QZ_Store_App.h" #include "UWater_frame_func_ReplyNB.h" #include "SOE.h" /**********************************************深水规约******************************************/ static u8 s_eep_complete_BLE=0; static u8 task_complete_ShenShui = PTL_PACK_BUSY; static u8 g_frame_temp_buf_ShenShui[UP_BUF_SIZE]; //数据部分缓冲区 static u16 g_frame_temp_len_ShenShui=0; static DateTime shenshui_rtcc_time; static STRUCT_FRAME_IES frame_struct_ShenShui; //规约信息 static u8 *new_message_data_rev_ShenShui; static u8 up_deal_stat_ShenShui = UP_DEAL_S0;//规约处理状态机 /*******主动上传数据相关变量*****************************************/ //积成规约上报缓存 static STRU_UPLOAD_FRAME store_frame;//长帧存储数据 //补报数据,间隔流量存储 static TYP_STATE_SS step_save_supplt=SS_STATE_S0; static RTCC_To_Float old_jiange_total_flow; static RTCC_To_Float new_jiange_total_flow; static RTCC_UNION_2U8TOU16 jiange_data; ///////////////////////////////////////////////////////////////////////////////////////////////////// static u8 task_complete_ble = PTL_PACK_BUSY; //static STRUCT_FRAME_MBUS frame_struct_MBUS; //规约信息 static u8 *new_message_data_rev_ble; static u16 g_frame_temp_len_ble; static u8 g_frame_temp_send_buf_ble[UP_BUF_SIZE]; //数据部分缓冲区 //static u8 s_eep_complete_mbus; static u8 up_deal_stat_ble=UP_DEAL_S0; //static UNION_QZ_STORE_MONTH mbus_month_data;//月冻结数据 static u8 frame_flag=0;//规约类型标志 //static u8 broad_addr[7] = {0xAA,0xAA,0xAA,0xAA,0xAA,0xAA,0xAA}; static u8 ble_read_access_flag=0;//是否允许通信标志 //3.2抄读表数 static void frame_func_reply_BLE_ReadData(void) { UNION_FLOAT_STORAGE tmp_float_datas1,tmp_float_datas2; u16 temp_u16data=0; task_complete_ble = PTL_PACK_FAIL; g_frame_temp_len_ble =0; //当前净累计流量F1 单位L tmp_float_datas1.float_storage_format.datas = Gp30CheckDataApp(GP30_APP_TOTAL_FLOW); tmp_float_datas2.float_storage_format.datas = tmp_float_datas1.float_datas*10;//转成L g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_float_datas2.float_storage_format.data_buf[0]; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_float_datas2.float_storage_format.data_buf[1]; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_float_datas2.float_storage_format.data_buf[2]; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_float_datas2.float_storage_format.data_buf[3]; //正向累计 g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_float_datas2.float_storage_format.data_buf[0]; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_float_datas2.float_storage_format.data_buf[1]; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_float_datas2.float_storage_format.data_buf[2]; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_float_datas2.float_storage_format.data_buf[3]; //反向累计 tmp_float_datas1.float_storage_format.datas = Gp30CheckDataApp(GP30_APP_TOTAL_FLOW_REVERSE); tmp_float_datas2.float_storage_format.datas = tmp_float_datas1.float_datas*10;//转成L g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_float_datas2.float_storage_format.data_buf[0]; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_float_datas2.float_storage_format.data_buf[1]; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_float_datas2.float_storage_format.data_buf[2]; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_float_datas2.float_storage_format.data_buf[3]; //信号强度 g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = 0;//蓝牙驱动暂无此接口 //电池电压 temp_u16data = PowerCheckValueSys(); g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = (temp_u16data&0xFF); g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_u16data>>8; //表计状态 UNION_4U8TOU32 temp_MetState; temp_MetState = getBleWetState(); g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_MetState.datas_map.data0; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_MetState.datas_map.data1; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_MetState.datas_map.data2; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_MetState.datas_map.data3; //软件版本 g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = (PROGRAME_VERSION>>24)&0xFF; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = (PROGRAME_VERSION>>16)&0xFF; //蓝牙固件版本 BleGetFirmVerson(&g_frame_temp_send_buf_ble[g_frame_temp_len_ble]); g_frame_temp_len_ble++; g_frame_temp_len_ble++; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = 0; //温度 tmp_float_datas1.float_datas = TempCheckValueApp(); if(tmp_float_datas1.float_datas < 0) //CMR还不能显示负温度 { tmp_float_datas1.float_datas = -tmp_float_datas1.float_datas; temp_u16data = (u32)(tmp_float_datas1.float_datas*100);//HexToBcd32((u32)(tempTempratureFlag*100)); temp_u16data|= 0x8000; } else { temp_u16data = (u32)(tmp_float_datas1.float_datas*100);//HexToBcd32((u32)(tempTempratureFlag*100)); temp_u16data &= 0x7FFF; } g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = (temp_u16data&0xFF); g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_u16data>>8; //运行天数 g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = (Sys_data_object.ee_data.data.work_hour/24)&0xFF; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = (Sys_data_object.ee_data.data.work_hour/24)>>8; //复位次数 g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = (Meter_GetResetCount()>>8)&0xFF; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = 0; //校时 DateTime tmp_data_time_buf; tmp_data_time_buf.s.year = *(new_message_data_rev_ble + 4); tmp_data_time_buf.s.month = *(new_message_data_rev_ble + 3); tmp_data_time_buf.s.day = *(new_message_data_rev_ble + 2); tmp_data_time_buf.s.hour = *(new_message_data_rev_ble + 1); tmp_data_time_buf.s.minute =*(new_message_data_rev_ble + 0); tmp_data_time_buf.s.second =0x00; if(Rtcc_Check_DateTime(&tmp_data_time_buf)==SUCCESS) { if(tmp_data_time_buf.s.year>=0x23) { RtccSetDateTime(&tmp_data_time_buf); RtccClearError(); PowerUnSleepClearSumSys(); //休眠管理，如果长时间不休眠的处理 } } task_complete_ble = PTL_PACK_SUCCESS; } //3.3 控阀0x55开阀，99应急关阀，AA半开阀,BB普通关阀，CC权限关阀，DD应急开阀 /* 01 普通开阀 02 应急开阀 03 普通关 04 应急关 05 权限关 */ static void frame_func_reply_BLE_ValveCtrl(void) { g_frame_temp_len_ble =0; #if defined(VALVE) if(0x55 == *new_message_data_rev_ble)//普通开阀 { ValveDealAppStart(VALVE_STATE_OPEN); g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = 0x01; } else if(0xDD == *new_message_data_rev_ble)//应急开阀 { //权限关阀期间,允许规约(手机)应急开阀. //通过将权限关阀状态改为应急关阀状态再执行应急开阀来实现 if(VALVE_STATE_CLOSE_LOCK == Sys_data_object.P1.ies_valve_paras.valve_state) { Sys_data_object.P1.ies_valve_paras.valve_state = VALVE_STATE_CLOSE_EMERGENCY; } ValveDealAppStart(VALVE_STATE_OPEN_EMERGENCY); g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = 0x02; } else if(0xBB == *new_message_data_rev_ble) //普通关阀 { ValveDealAppStart(VALVE_STATE_CLOSE); g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = 0x03; } else if(0x99 == *new_message_data_rev_ble) //应急关阀 { ValveDealAppStart(VALVE_STATE_CLOSE_EMERGENCY); g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = 0x04; } else if(0xCC== *new_message_data_rev_ble) //权限关阀 { ValveDealAppStart(VALVE_STATE_CLOSE_LOCK); g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = 0x05; } else { task_complete_ble = PTL_PACK_FAIL; } # else task_complete_ble = PTL_PACK_FAIL; #endif task_complete_ble = PTL_PACK_SUCCESS; } //3.4读表地址 static void frame_func_reply_BLE_ReadAddr(void) { g_frame_temp_len_ble = 0; BleGetCurMacAddr(g_frame_temp_send_buf_ble); g_frame_temp_len_ble+=6; task_complete_ble = PTL_PACK_SUCCESS; } //3.5写表地址,修改mac地址 static void frame_func_s3_BLE_SetAddr(void) { if(TASK_IDLE == EepIfIdle())//存储数据到EEPROM { g_frame_temp_len_ble = 0; if(0x01 == Sys_data_object.P1.start_using_flg) { task_complete_ble = PTL_PACK_FAIL; return; } for (int tmp_i = 0; tmp_i < 7; tmp_i++) { Sys_data_object.P1.met_addr[tmp_i] = *(new_message_data_rev_ble + tmp_i); } EepWrite(&Sys_data_object.P1.met_addr[0], EEP_FRAME_MET_ADDR, 7, &s_eep_complete_BLE); Frame_Para_Init(); FrameSetMsgApp(MsgAddr_Change);//更新MAC地址 task_complete_ble = PTL_PACK_SUCCESS; } } //3.6设置表底数 static void frame_func_reply_BLE_WriteInitValue(void) { g_frame_temp_len_ble=0; if (0x01 == Sys_data_object.P1.start_using_flg) //出厂启用 { task_complete_ble = PTL_PACK_FAIL; return; } FrameSetMsgApp(InitialDataMsg); //累计流量防护 UNION_4U8TOU32 tmp_datas_buf1,tmp_datas_buf2; fram_tools_writeU32ByBuf(tmp_datas_buf1.data_buf, new_message_data_rev_ble, 0); fram_tools_writeU32ByBuf(tmp_datas_buf2.data_buf, (new_message_data_rev_ble + 4), 0); Gp30InitDataApp(tmp_datas_buf1.datas/10,tmp_datas_buf2.datas/10); FrameSetMsgApp(MsgBLE_AdvChange);//下初值,更新广播数据 task_complete_ble = PTL_PACK_SUCCESS; } //新升级规约 static void frame_func_s3_BLE_diff_BootLoad(void) { static u8 s_bootloader_version_flg = 0; //远程升级版本比较结果 switch(up_deal_stat_ble) { case UP_DEAL_S0: { if(TASK_IDLE == EepIfIdle()) { g_frame_temp_len_ble = 0; Sys_data_object.P2.mcu = *(new_message_data_rev_ble + 0);//平台类型 Sys_data_object.P2.mcu_model = *(new_message_data_rev_ble + 1);//MCU型号 Sys_data_object.P2.product_model = *(new_message_data_rev_ble + 2);//产品型号 Sys_data_object.P2.hardware_version = *(new_message_data_rev_ble + 3);//硬件版本号 u16 software_version = (AsciiToHex(*(new_message_data_rev_ble + 10))<<12)+ (AsciiToHex(*(new_message_data_rev_ble + 11))<<8)+ (AsciiToHex(*(new_message_data_rev_ble + 12))<<4)+ (AsciiToHex(*(new_message_data_rev_ble + 13))<<0); if ((Sys_data_object.P2.hardware_version == HARDWARE_VERSION_USED)&&//硬件版本2.4 (0x22== Sys_data_object.P2.mcu) && //高:0-MIC, 1-ST, 2-HC32; 低:0-水表,1-气表,2-超水,3-超气 (0x00 == Sys_data_object.P2.mcu_model)&&//0x00--HC32L196 (software_version != (PROGRAME_VERSION>>16))&&//同版本不升级 #if defined(VALVE) ((BCD2HEX(GP30_APP_DNX)+1) == Sys_data_object.P2.product_model))//产品类型;有阀口径+1 #else (BCD2HEX(GP30_APP_DNX) == Sys_data_object.P2.product_model))//产品类型;表计口径 #endif { //软件版本 fram_tools_writeU32ByBuf(Sys_data_object.P2.soft_version, (new_message_data_rev_ble + 10), 0); //升级总字节数 fram_tools_writeU32ByBuf(Sys_data_object.P2.update_num.data_buf, (new_message_data_rev_ble + 4), 0); //升级校验码 Sys_data_object.P2.update_check.datas_map.data0 = *(new_message_data_rev_ble + 8); Sys_data_object.P2.update_check.datas_map.data1 = *(new_message_data_rev_ble + 9); //升级通道:1-串口;2-coap;3-udp;4-蓝牙 Sys_data_object.P2.bootloader_datas_sourse = *(new_message_data_rev_ble + 14); //升级标志/方式:1-完整升级;2-差分升级 if(*(new_message_data_rev_ble + 15) == 2) { Sys_data_object.P2.bootloader_update_flg = 0x77;//差分升级 } else { Sys_data_object.P2.bootloader_update_flg = 0x55;//全包升级 } //包号清0 Sys_data_object.P2.bootloader_paknum.datas =0; //程序破坏标志清0 Sys_data_object.P2.bootloader_RSSI = 0; s_bootloader_version_flg = 0x00; FrameSetMsgApp(MsgUpdateSoftVersionCheckOk); EepWrite(&Sys_data_object.P2.soft_version[0], EEP_SOFT_VERSION, 17, &s_eep_complete_BLE); } else { s_bootloader_version_flg = 0x10; if(software_version == (PROGRAME_VERSION>>16))//版本相同 { s_bootloader_version_flg |= 0x20; } if (0x22 != Sys_data_object.P2.mcu) { s_bootloader_version_flg = s_bootloader_version_flg|0x01; } if(0x00 != Sys_data_object.P2.mcu_model) { s_bootloader_version_flg = s_bootloader_version_flg|0x02; } if(Sys_data_object.P2.hardware_version != HARDWARE_VERSION_USED) { s_bootloader_version_flg = s_bootloader_version_flg|0x04; } #if defined(VALVE) if((BCD2HEX(GP30_APP_DNX)+1) != Sys_data_object.P2.product_model)//产品类型;有阀口径+1 #else if(BCD2HEX(GP30_APP_DNX) != Sys_data_object.P2.product_model)//产品类型;表计口径 #endif { s_bootloader_version_flg = s_bootloader_version_flg|0x08; } } up_deal_stat_ble = UP_DEAL_S1; } } break; case UP_DEAL_S1: { if(TASK_IDLE == EepIfIdle())//存储数据完成 { g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = Sys_data_object.P2.mcu; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = Sys_data_object.P2.mcu_model; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = Sys_data_object.P2.product_model; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = Sys_data_object.P2.hardware_version; fram_tools_writeU32ByBuf(&g_frame_temp_send_buf_ble[4], Sys_data_object.P2.soft_version, 0); g_frame_temp_len_ble +=4; //升级版本后加升级通道与升级方式 g_frame_temp_send_buf_ble[g_frame_temp_len_ble++]=Sys_data_object.P2.bootloader_datas_sourse;//升级通道 g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = *(new_message_data_rev_ble + 15); g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = s_bootloader_version_flg; task_complete_ble = PTL_PACK_SUCCESS; FrameSetMsgApp(BootloaderMsg); if(01 == LcdCheckStateApp()) //检定状态 { FrameSetMsgApp(OutVerificationMsg);//出检定msg } up_deal_stat_ble = UP_DEAL_S0; } } break; default: { up_deal_stat_ble = UP_DEAL_S0; task_complete_ble = PTL_PACK_FAIL; } break; } } //3.8 读取软件版本号,程序版本2，硬件版本2，蓝牙固件3字节 static void frame_func_reply_BLE_ReadSwVersion(void) { g_frame_temp_len_ble=0; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = (PROGRAME_VERSION>>24)&0xFF; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = (PROGRAME_VERSION>>16)&0xFF; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = (PROGRAME_VERSION>>8)&0xFF; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = (PROGRAME_VERSION>>0)&0xFF; BleGetFirmVerson(&g_frame_temp_send_buf_ble[g_frame_temp_len_ble]); g_frame_temp_len_ble+=3; task_complete_ble = PTL_PACK_SUCCESS; } //3.9读取表计时间 static void frame_func_reply_BLE_TimeFrequency(void) { DateTime date_time; g_frame_temp_len_ble =0; RtccGetDateTime(&date_time); g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = date_time.s.second; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = date_time.s.minute; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = date_time.s.hour; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = date_time.s.day; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = date_time.s.month; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = date_time.s.year; task_complete_ble = PTL_PACK_SUCCESS; } //3.10校时 static void frame_func_reply_BLE_CalibrateTime(void) { DateTime tmp_data_time_buf; g_frame_temp_len_ble = 0; tmp_data_time_buf.s.year = *(new_message_data_rev_ble + 5); tmp_data_time_buf.s.month = *(new_message_data_rev_ble + 4); tmp_data_time_buf.s.day = *(new_message_data_rev_ble + 3); tmp_data_time_buf.s.hour = *(new_message_data_rev_ble + 2); tmp_data_time_buf.s.minute =*(new_message_data_rev_ble + 1); tmp_data_time_buf.s.second =*(new_message_data_rev_ble + 0); RtccSetDateTime(&tmp_data_time_buf); RtccClearError(); PowerUnSleepClearSumSys(); //休眠管理，如果长时间不休眠的处理 2015-7-15 增加的接口。。。 task_complete_ble = PTL_PACK_SUCCESS; } //3.11启动自检 static void frame_func_reply_BLE_TestStart(void) { //阀门 rtcc 读数 EE GP30 g_frame_temp_len_ble = 0; task_complete_ble = PTL_PACK_SUCCESS; } //3.12 查询自检结果 static void frame_func_reply_BLE_TestRead(void) { g_frame_temp_len_ble = 0; task_complete_ble = PTL_PACK_SUCCESS; } //3.15 读取时间段SOE static void frame_func_reply_BLE_ReadSoe(void) { static u8 num_get,num_to_get,num_to_read,totalnum; static mtype16_ temp_soe_type; static ONE_SOE soe_event_read; static DateTime_noweek start_time; static DateTime_noweek end_time; switch(up_deal_stat_ble) { case UP_DEAL_S0: { totalnum = 0; num_get = 0; num_to_read = Sys_data_object.P4.Point_SOE_write; temp_soe_type.to_uint8[0] = *(new_message_data_rev_ble); //获取事件代码类型 temp_soe_type.to_uint8[1] = *(new_message_data_rev_ble+1); start_time.s.year = *(new_message_data_rev_ble + 2); //起始时间 start_time.s.month = *(new_message_data_rev_ble + 3); start_time.s.day = *(new_message_data_rev_ble + 4); start_time.s.hour = *(new_message_data_rev_ble + 5); start_time.s.minute = *(new_message_data_rev_ble + 6); start_time.s.second = *(new_message_data_rev_ble + 7); end_time.s.year = *(new_message_data_rev_ble + 8); //结束时间 end_time.s.month = *(new_message_data_rev_ble + 9); end_time.s.day = *(new_message_data_rev_ble + 10); end_time.s.hour = *(new_message_data_rev_ble + 11); end_time.s.minute = *(new_message_data_rev_ble + 12); end_time.s.second = *(new_message_data_rev_ble + 13); num_to_get = *(new_message_data_rev_ble + 14); //读取数量 if((0 == num_to_get) || (MAX_NUM_READ_SOE <= num_to_get)) { up_deal_stat_ble = UP_DEAL_S3; } else { up_deal_stat_ble = UP_DEAL_S1; } } break; case UP_DEAL_S1://读取一条SOE { if(totalnum >= TOTAL_NUM_SOE)//总共读TOTAL_NUM_SOE次 强制退出不能再读了 { up_deal_stat_ble = UP_DEAL_S3; break; } if(TASK_IDLE == EepIfIdle())//存储数据到EEPROM { totalnum++; if(num_to_read > TOTAL_NUM_SOE) //防止指针跑飞了 { num_to_read = TOTAL_NUM_SOE; } if(num_to_read == 0) { num_to_read = TOTAL_NUM_SOE; } num_to_read--; EepRead(EEP_ADDR_SOE_BASE + (u16)num_to_read*LENGTH_ONE_SOE,(u8*)&soe_event_read,LENGTH_ONE_SOE, &s_eep_complete_BLE); up_deal_stat_ble = UP_DEAL_S2; } } break; case UP_DEAL_S2: { if(TASK_IDLE == EepIfIdle())//读完了 { if(TRUE == Check_One_Soe(temp_soe_type.to_uint16,&start_time,&end_time,&soe_event_read))//检测到一条有效的SOE { memcpy(g_frame_temp_send_buf_ble + 1 + (u16)num_get * LENGTH_ONE_SOE,&soe_event_read,LENGTH_ONE_SOE); num_get++; if(num_get >= num_to_get)//读完了 { up_deal_stat_ble = UP_DEAL_S3; break; } } up_deal_stat_ble = UP_DEAL_S1; } } break; case UP_DEAL_S3: { up_deal_stat_ble = UP_DEAL_S0; g_frame_temp_send_buf_ble[0] = num_get; g_frame_temp_len_ble = (1 + (u16) num_get * LENGTH_ONE_SOE); task_complete_ble = PTL_PACK_SUCCESS; } break; default: { up_deal_stat_ble = UP_DEAL_S0; task_complete_ble = PTL_PACK_FAIL; } break; } } //3.16 读取欠压阈值 static void frame_func_reply_BLE_ReadVoltageLow(void) { g_frame_temp_len_ble =0; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = Sys_data_object.P1.voltage_low[0]; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = Sys_data_object.P1.voltage_low[1]; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = Sys_data_object.P1.voltage_low[2]; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = Sys_data_object.P1.voltage_low[3]; up_deal_stat_ble = UP_DEAL_S0; task_complete_ble = PTL_PACK_SUCCESS; } //3.17 设置欠压阈值 static void frame_func_reply_BLE_SetVoltageLow(void) { if(TASK_IDLE == EepIfIdle()) { g_frame_temp_len_ble = 0; Sys_data_object.P1.voltage_low[0] = *(new_message_data_rev_ble + 0); Sys_data_object.P1.voltage_low[1] = *(new_message_data_rev_ble + 1); Sys_data_object.P1.voltage_low[2] = *(new_message_data_rev_ble + 2); Sys_data_object.P1.voltage_low[3] = *(new_message_data_rev_ble + 3); EepWrite(Sys_data_object.P1.voltage_low, EEP_BLE_PARA_VOLTAGE, 4, &s_eep_complete_BLE); up_deal_stat_ble = UP_DEAL_S0; task_complete_ble = PTL_PACK_SUCCESS; } } //3.25 读取日结数据 static UNION_QZ_STORE_DAY temp_daily_data; static void frame_func_reply_BLE_ReadDaily(void) { static u8 temp_read_index = 0; static u8 temp_read_code = 0; static u8 temp=0; switch(up_deal_stat_ble) { case UP_DEAL_S0: { temp_read_code = 1; g_frame_temp_len_ble =0; temp_read_index = get_QZ_StorePara(QZ_StoreCurIndex_Daily); up_deal_stat_ble = UP_DEAL_S1; } break; case UP_DEAL_S1: { if(TASK_IDLE == EepIfIdle())//读取历史数据 { if (temp_read_index >= temp_read_code) { temp = temp_read_index - temp_read_code; } else { temp = 100 - (temp_read_code - temp_read_index); } EepRead((EEP_ADDR_QZ_STORE_DAY +(temp*128)), temp_daily_data.data_buf, 128, &s_eep_complete_BLE); up_deal_stat_ble = UP_DEAL_S2; } } break; case UP_DEAL_S2: { if(TASK_IDLE == EepIfIdle())//读取历史数据完成 { if(temp_read_code<32) { if((temp_daily_data.Data.Head==0x5A)&&(temp_daily_data.Data.End==0xA5)) { temp_daily_data.Data.DailyFlowData.gp22_u32 = temp_daily_data.Data.DailyFlowData.gp22_u32*10; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_daily_data.Data.DailyFlowData.buf[0]; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_daily_data.Data.DailyFlowData.buf[1]; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_daily_data.Data.DailyFlowData.buf[2]; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_daily_data.Data.DailyFlowData.buf[3]; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_daily_data.Data.MetState[0]; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_daily_data.Data.MetState[1]; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_daily_data.Data.MetState[2]; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_daily_data.Data.MetState[3]; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_daily_data.Data.Year; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_daily_data.Data.Month; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_daily_data.Data.Day; } temp_read_code++; up_deal_stat_ble = UP_DEAL_S1; } else { task_complete_ble = PTL_PACK_SUCCESS; up_deal_stat_ble = UP_DEAL_S0; } } } break; default: { task_complete_ble = PTL_PACK_FAIL; up_deal_stat_ble = UP_DEAL_S0; } break; } } //3.26 读取月结数据 static UNION_QZ_STORE_MONTH temp_month_data; static void frame_func_reply_BLE_ReadMonth(void) { static u8 temp_read_index = 0; static u8 temp_read_code = 0; static u8 temp=0; switch(up_deal_stat_ble) { case UP_DEAL_S0: { temp_read_code = 0; g_frame_temp_len_ble =0; temp_read_index = get_QZ_StorePara(QZ_StoreCurIndex_Month); up_deal_stat_ble = UP_DEAL_S1; } break; case UP_DEAL_S1: { if(TASK_IDLE == EepIfIdle())//读取历史数据 { if (temp_read_index >= temp_read_code) { temp = temp_read_index - temp_read_code; } else { temp = 24 - (temp_read_code - temp_read_index); } EepRead((EEP_ADDR_QZ_STORE_MONTH +(temp*6)), temp_month_data.data_buf, 6, &s_eep_complete_BLE); up_deal_stat_ble = UP_DEAL_S2; } } break; case UP_DEAL_S2: { if(TASK_IDLE == EepIfIdle())//读取历史数据完成 { if(temp_read_code<24) { temp_month_data.Data.FlowData.gp22_u32 = temp_month_data.Data.FlowData.gp22_u32*10; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_month_data.Data.FlowData.buf[0]; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_month_data.Data.FlowData.buf[1]; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_month_data.Data.FlowData.buf[2]; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_month_data.Data.FlowData.buf[3]; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_month_data.Data.Year; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_month_data.Data.Month; temp_read_code++; up_deal_stat_ble = UP_DEAL_S1; } else { task_complete_ble = PTL_PACK_SUCCESS; up_deal_stat_ble = UP_DEAL_S0; } } } break; default: { task_complete_ble = PTL_PACK_FAIL; up_deal_stat_ble = UP_DEAL_S0; } break; } } //终端重启 static void frame_func_reply_BLE_TernalRestart(void) { g_frame_temp_len_ble = 0; FrameSetMsgApp(BootloaderMsg); if(01 == LcdCheckStateApp()) //检定状态 { FrameSetMsgApp(OutVerificationMsg); //出检定msg } task_complete_ble = PTL_PACK_SUCCESS; } //配置功能 static void frame_func_s3_BLE_CfgFunctioncfg(void) { if(TASK_IDLE == EepIfIdle())//存储数据到EEPROM { g_frame_temp_len_ble = 0; UNION_4U8TOU32 temp_flag_bytes; fram_tools_writeU32ByBuf(temp_flag_bytes.data_buf, (new_message_data_rev_ble + 0), 0); if (temp_flag_bytes.datas > 0) { for(int temp_i = 0; temp_i < 32; temp_i++) { if (0x00000001 == ((temp_flag_bytes.datas >> temp_i) & 0x00000001)) { Sys_data_object.P1.func_cfg_bytes[temp_i] = *(new_message_data_rev_ble + 4 + temp_i); } } EepWrite(&Sys_data_object.P1.func_cfg_bytes[0], EEP_FRAME_FUNCCFGBYTES_ADDR, 32, &s_eep_complete_BLE); Frame_Para_Init(); FrameSetMsgApp(MsgBLE_ConfigChange); } for(int i = 0; i<32 ;i++) { g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = Sys_data_object.P1.func_cfg_bytes[i]; } task_complete_ble = PTL_PACK_SUCCESS; } } //读瞬时流量和温度 static void frame_func_reply_BLE_ReadInstantFlowAndTemperature(void) { MET_STATE temp_state; //状态字 static DateTime tmp_time_buf; UNION_4U8TOU32 tmp_datas_buf; UNION_FLOAT_STORAGE tmp_float_datas_buf; g_frame_temp_len_ble=0; tmp_float_datas_buf.float_storage_format.datas = Gp30CheckDataApp(GP30_APP_TOTAL_FLOW); //当前累积流量 tmp_datas_buf.datas = (u32) tmp_float_datas_buf.float_datas; tmp_datas_buf.datas = HexToBcd32(tmp_datas_buf.datas); fram_tools_writeU32ByBuf(&g_frame_temp_send_buf_ble[g_frame_temp_len_ble], tmp_datas_buf.data_buf, 0); g_frame_temp_len_ble+=4; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = 0x2C;//m3 tmp_datas_buf.datas = Gp30CheckDataApp(GP30_APP_INS_FLOW); //瞬时流量(四位小数，放大100000倍)//BCD tmp_datas_buf.datas = Gp30DataToBcd(tmp_datas_buf.datas, 100); fram_tools_writeU32ByBuf(&g_frame_temp_send_buf_ble[5], tmp_datas_buf.data_buf, 0); g_frame_temp_len_ble+=4; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = 0x35;//m3/h float tmep = TempCheckValueApp(); // if(tmep <0) { tmp_datas_buf.datas = (u32)(tmep*(-100)); tmp_datas_buf.datas &= 0x0FFFF; tmp_datas_buf.datas |= 0x80000; } else { tmp_datas_buf.datas = (u32)(tmep*(100)); tmp_datas_buf.datas &= 0x7FFFF; } g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.datas_map.data0; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.datas_map.data1; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.datas_map.data2; RtccGetDateTime(&tmp_time_buf); g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_time_buf.s.day; //日 g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_time_buf.s.hour; //时 g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_time_buf.s.minute; //分 g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_time_buf.s.second; //秒 temp_state = FrameGetByte(); g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_state.stat0; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_state.stat1; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_state.stat2; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_state.stat3; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_state.stat4; task_complete_ble = PTL_PACK_SUCCESS; } //设置为检定状态 static void frame_func_reply_BLE_SetVerification(void) { g_frame_temp_len_ble=0; if(*new_message_data_rev_ble == 1)//进入检定 { if (0 == Sys_data_object.P1.enable_verification_function) { task_complete_ble = PTL_PACK_FAIL; return; } FrameSetMsgApp(SetVerificationMsg); FrameClearMsgApp(MsgCaliberate);//清零 单程时间校准校准标志 } else if(*new_message_data_rev_ble == 10)//退出检定 { if(01 == LcdCheckStateApp()) //检定状态 { FrameSetMsgApp(OutVerificationMsg); //出检定msg } } g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = *new_message_data_rev_ble; task_complete_ble = PTL_PACK_SUCCESS; } //读检定数据 static void frame_func_reply_BLE_ReadVerificationData(void) { int i; static MET_STATE temp_state; //状态字 static DateTime tmp_time_buf; UNION_4U8TOU32 tmp_datas_buf; UNION_FLOAT_STORAGE tmp_float_datas_buf; float tempTempratureFlag; g_frame_temp_len_ble=0; if(01 != LcdCheckStateApp()) //非检定状态 { task_complete_ble = PTL_PACK_FAIL; return; } //温度 if(TRUE==Check_Start_STOP_Filter_Flag())//获取start-stop完成温度滤波标志 { Clear_Start_STOP_Filter_Flag();//清零start-stop完成温度滤波标志 tempTempratureFlag = Check_Temperature_Parameter();//传递滤波的反算温度数据 } else { tempTempratureFlag = TempCheckValueApp();//获取实时温度 } if(tempTempratureFlag < 0) { tempTempratureFlag = -tempTempratureFlag; tmp_datas_buf.datas = HexToBcd32((u32)(tempTempratureFlag*100)); tmp_datas_buf.datas|= 0x800000; } else { tmp_datas_buf.datas = HexToBcd32((u32)(tempTempratureFlag*100)); tmp_datas_buf.datas &= 0x7FFFFF; } for(i=0;i<3;i++) { g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.data_buf[i]; } //累计流量 tmp_float_datas_buf.float_storage_format.datas = Gp30CheckTestDataApp(GP30_APP_TOTAL_FLOW); //累计流量//BCD tmp_datas_buf.datas = (u32) (tmp_float_datas_buf.float_datas); tmp_datas_buf.datas = HexToBcd32(tmp_datas_buf.datas); for(i=0;i<4;i++) { g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.data_buf[i]; } g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = 0x2C; //m? //瞬时流量 tmp_datas_buf.datas = Gp30CheckTestDataApp(GP30_APP_INS_FLOW); //瞬时流量(四位小数，放大100000倍)//BCD tmp_datas_buf.datas = Gp30DataToBcd(tmp_datas_buf.datas, 100); for(i=0;i<4;i++) { g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.data_buf[i]; } g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = 0x35; //m?/h //up单程时间 tmp_datas_buf.datas = Gp30CheckTestDataApp(GP30_APP_TOF);//up单程时间获取 for(i=0;i<4;i++) { g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.data_buf[i]; } //Magnify 100000 times（m3/h）：Real-time instantaneous flow tmp_datas_buf.datas = Gp30CheckTestDataApp(GP30_APP_INS_FLOW_LCD); tmp_datas_buf.datas = Gp30DataToBcd(tmp_datas_buf.datas, 100); for(i=0;i<4;i++) { g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.data_buf[i]; } //tof tmp_datas_buf.datas = Gp30CheckTestDataApp(GP30_APP_DIFF); //时间差 for(i=0;i<4;i++) { g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.data_buf[i]; } ////累计工作时间//BCD tmp_datas_buf.datas = RtccGetWorkHourApp(); tmp_datas_buf.datas = HexToBcd32(tmp_datas_buf.datas); for(i=0;i<3;i++) { g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.data_buf[i]; } //实时时间 RtccGetDateTime(&tmp_time_buf); g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = 0x20; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_time_buf.s.year; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_time_buf.s.month; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_time_buf.s.day; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_time_buf.s.hour; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_time_buf.s.minute; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_time_buf.s.second; //状态字 temp_state = FrameGetByte(); g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_state.stat0; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_state.stat1; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_state.stat2; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_state.stat3; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = temp_state.stat4; //************************新增数据:15字节***********************/ //反算温度T0-T2（T2）:3字节 //温度T0-T2（T2）:3字节 #if WENDU_FANSUAN_OPEN tempTempratureFlag = TempCheckValueApp();//传递实时的反算数据 if(tempTempratureFlag < 0) { tempTempratureFlag = -tempTempratureFlag; tmp_datas_buf.datas = HexToBcd32((u32)(tempTempratureFlag*100)); tmp_datas_buf.datas|= 0x800000; } else { tmp_datas_buf.datas = HexToBcd32((u32)(tempTempratureFlag*100)); tmp_datas_buf.datas &= 0x7FFFFF; } for(i=0;i<3;i++) { g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.data_buf[i]; } tmp_datas_buf.datas = Gp30CheckDataApp(11); //TOF_UP补偿系数 g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.datas_map.data0; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.datas_map.data1; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.datas_map.data2; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.datas_map.data3; tmp_datas_buf.datas = Gp30CheckDataApp(12);//TOF_DOWN补偿系数 g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.datas_map.data0; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.datas_map.data1; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.datas_map.data2; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.datas_map.data3; #else//常规程序反算温度默认写0 for(i=0;i<3;i++) { g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = 0; } //up amplitude(V1):4字节 tmp_datas_buf.datas = Gp30CheckTestDataApp(GP30_APP_PEAK_UP); g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.datas_map.data0; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.datas_map.data1; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.datas_map.data2; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.datas_map.data3; //down amplitude(V2):4字节 tmp_datas_buf.datas = Gp30CheckTestDataApp(GP30_APP_PEAK_DOWN); g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.datas_map.data0; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.datas_map.data1; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.datas_map.data2; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.datas_map.data3; #endif //预留:4字节 tmp_datas_buf.datas = Gp30CheckTestDataApp(GP30_APP_DOWN);//down 的单程时间 g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.datas_map.data0; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.datas_map.data1; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.datas_map.data2; g_frame_temp_send_buf_ble[g_frame_temp_len_ble++] = tmp_datas_buf.datas_map.data3; task_complete_ble = PTL_PACK_SUCCESS; } //蓝牙规约:读某天历史数据 static void frame_func_reply_BLE_ReadHistoryData(void) { u8 temp = 0; u8 temp_read_index = 0; u8 temp_read_code = *new_message_data_rev_ble; switch(up_deal_stat_ble) { case UP_DEAL_S0: { if(TASK_IDLE == EepIfIdle())//读取历史数据 { g_frame_temp_len_ble =0; temp_read_index = NB_SS_Control_GetPara(NB_HistroyReadIndex); if (temp_read_index >= temp_read_code) { temp = temp_read_index - temp_read_code; } else { temp = 32 - (temp_read_code - temp_read_index); } EepRead((FRAME_NBIot_HISTORY_READ_ADD +(temp*PACK_NUM_GPRS)), g_frame_temp_send_buf_ble, PACK_NUM_GPRS, &s_eep_complete_BLE); up_deal_stat_ble = UP_DEAL_S1; } } break; case UP_DEAL_S1: { if(TASK_IDLE == EepIfIdle())//读取历史数据完成 { g_frame_temp_len_ble = PACK_NUM_GPRS; task_complete_ble = PTL_PACK_SUCCESS; up_deal_stat_ble = UP_DEAL_S0; } } break; default: { up_deal_stat_ble = UP_DEAL_S0; task_complete_ble = PTL_PACK_FAIL; } break; } } //深水规约:读某天历史数据 static void frame_func_reply_NB_ReadHistoryData(void) { u8 temp = 0; u8 temp_read_index = 0; u8 temp_read_code = *new_message_data_rev_ShenShui; switch(up_deal_stat_ShenShui) { case UP_DEAL_S0: { if(TASK_IDLE == EepIfIdle())//读取历史数据 { g_frame_temp_len_ShenShui =0; temp_read_index = NB_SS_Control_GetPara(NB_HistroyReadIndex); if (temp_read_index >= temp_read_code) { temp = temp_read_index - temp_read_code; } else { temp = 32 - (temp_read_code - temp_read_index); } EepRead((FRAME_NBIot_HISTORY_READ_ADD +(temp*PACK_NUM_GPRS)), g_frame_temp_buf_ShenShui, PACK_NUM_GPRS, &s_eep_complete_BLE); up_deal_stat_ShenShui = UP_DEAL_S1; } } break; case UP_DEAL_S1: { if(TASK_IDLE == EepIfIdle())//读取历史数据完成 { g_frame_temp_len_ShenShui = PACK_NUM_GPRS; task_complete_ShenShui = PTL_PACK_SUCCESS; up_deal_stat_ShenShui = UP_DEAL_S0; } } break; default: { up_deal_stat_ShenShui = UP_DEAL_S0; task_complete_ShenShui = PTL_PACK_FAIL; } break; } } //设置OTA static void frame_func_reply_BLE_SetOta(void) { g_frame_temp_len_ble=0; if(*new_message_data_rev_ble == 0xAA)//进入OTA升级状态 { FrameSetMsgApp(MsgBLE_OtaEnter); } else { FrameSetMsgApp(MsgBLE_OtaExit); } task_complete_ble = PTL_PACK_SUCCESS; } void setBleReadAccessFlag(u8 data) { ble_read_access_flag = data; } static u8 getBleReadAccessFlag(void) { return ble_read_access_flag; } //积成规约表地址判断 u8 check_met_addr_BLE(u8 *p_buf,u8 *des_buf) { u8 tmp_i; for (tmp_i = 0; tmp_i < 7; tmp_i++) { if (*(p_buf + 2 +tmp_i) != *(des_buf + tmp_i)) { break; } } if( (BLE_READ_MET_DI0 == *(p_buf+13)) ||(BLE_SET_MET_DI0 == *(p_buf+13)))//读写表地址 { for(tmp_i=0;tmp_i < 7;tmp_i++) { if(0xAA != *(p_buf + 2 + tmp_i))//广播读地址 break; } } if(tmp_i >= 7) { return SUCCESS_IES; } return ERROR_IES; } //蓝牙规约解析 static u8 crack_frame_BLE_Static(u16 frame_lenth,u8 *frame_buffer) { u16 tmp_i = 0; u16 tmp_j = 0; u8 tmp_check = 0; for (tmp_i = 0; tmp_i < frame_lenth; tmp_i++) { if (FM_HEAD_MARK == *(frame_buffer + tmp_i)) { if (MET_TYPE == *(frame_buffer + tmp_i + 1)) { frame_struct_ShenShui.head_site = tmp_i; //记录帧头 frame_struct_ShenShui.sta = *(frame_buffer + tmp_i + 10);//状态字 frame_struct_ShenShui.len = *(frame_buffer + tmp_i + 11)+ *(frame_buffer + tmp_i + 12)*256;//数据长度 frame_struct_ShenShui.end_site = frame_struct_ShenShui.head_site + frame_struct_ShenShui.len + 14; //长度占俩字节 再改14 frame_struct_ShenShui.check_len = frame_struct_ShenShui.end_site - frame_struct_ShenShui.head_site - 1; //检测数据帧是否有效 if ((frame_struct_ShenShui.end_site < frame_lenth) && (FM_END_MARK == *(frame_buffer + frame_struct_ShenShui.end_site))) { frame_struct_ShenShui.ctrl = *(frame_buffer + frame_struct_ShenShui.head_site + 9); //计算校验和 for (tmp_j = frame_struct_ShenShui.head_site; tmp_j < (frame_struct_ShenShui.end_site - 1); tmp_j++) { tmp_check += *(frame_buffer + tmp_j); } if (tmp_check == *(frame_buffer + frame_struct_ShenShui.end_site - 1)) { if((frame_struct_ShenShui.sta & 0x01) == 0x01)//判断是否为加密规约 { //还原成明文规约:解密,修改加密标志 //AES_decrypt(frame_buffer+frame_struct_ShenShui.head_site +12, frame_struct_ShenShui.len,Sys_data_object.P1.key); AES_decrypt(frame_buffer+frame_struct_ShenShui.head_site +13, frame_struct_ShenShui.len,Sys_data_object.P1.key); //非加密校验和 tmp_check = 0; for (tmp_j = frame_struct_ShenShui.head_site; tmp_j < (frame_struct_ShenShui.end_site - 1); tmp_j++) { tmp_check += *(frame_buffer + tmp_j); } *(frame_buffer + frame_struct_ShenShui.end_site - 1) = tmp_check; } if (SUCCESS_IES == check_met_addr_BLE(frame_buffer + frame_struct_ShenShui.head_site, Sys_data_object.P1.met_addr)) { frame_struct_ShenShui.sta &= 0xFD; //表示非主动上传（bit1为1时表示主动上传，0表示应答） frame_struct_ShenShui.DI0 = *(frame_buffer + frame_struct_ShenShui.head_site + 13); frame_struct_ShenShui.DI1 = *(frame_buffer + frame_struct_ShenShui.head_site + 14); frame_struct_ShenShui.serial_num0 = *(frame_buffer + frame_struct_ShenShui.head_site + 15); frame_struct_ShenShui.serial_num1 = *(frame_buffer + frame_struct_ShenShui.head_site + 16); new_message_data_rev_ble = frame_buffer + frame_struct_ShenShui.head_site + 17; return SUCCESS_IES; } } } } } } return ERROR_IES; } static u8 up_deal_code_ble_static(void) { task_complete_ble = PTL_PACK_BUSY; switch(frame_struct_ShenShui.ctrl) { case 0xb0: { FrameSetMsgApp(MsgBLE_RevData);//收到指令信息 if(frame_struct_ShenShui.DI0 != BLE_READ_DATA_DI0)//如果不是读表数据命令,则判断是否鉴权成功 { if(getBleReadAccessFlag()==0) { up_deal_stat_ShenShui = UP_DEAL_S0; task_complete_ble = PTL_PACK_FAIL; return task_complete_ble; } } switch(frame_struct_ShenShui.DI0) { case BLE_READ_DATA_DI0://抄读表数 { frame_func_reply_BLE_ReadData(); FrameSetMsgApp(MsgBLE_ReadData);//读表数据消息 setBleReadAccessFlag(1);//鉴权成功 } break; case BLE_VALVE_CTRL_DI0://阀控 { frame_func_reply_BLE_ValveCtrl(); } break; case BLE_READ_MET_DI0://读取表地址 { frame_func_reply_BLE_ReadAddr(); } break; case BLE_SET_MET_DI0://设置表地址 { frame_func_s3_BLE_SetAddr(); } break; case BLE_SET_DATA_DI0://设置表底数 { frame_func_reply_BLE_WriteInitValue(); } break; case BLE_SET_BOOT_DI0://升级 { frame_func_s3_BLE_diff_BootLoad(); } break; case BLE_READ_VERSION_DI0://读软件版本 { frame_func_reply_BLE_ReadSwVersion(); } break; case BLE_READ_TIME_DI0://读表时间 { frame_func_reply_BLE_TimeFrequency(); } break; case BLE_SET_TIME_DI0://设置表时间 { frame_func_reply_BLE_CalibrateTime(); } break; case BLE_TEST_START_DI0://启动自检 { frame_func_reply_BLE_TestStart(); } break; case BLE_TEST_READ_DI0://查询自检 { frame_func_reply_BLE_TestRead(); } break; case BLE_READ_SOE_DI0://读SOE { frame_func_reply_BLE_ReadSoe(); } break; case BLE_READ_PWLOW_DI0://读欠压阈值 { frame_func_reply_BLE_ReadVoltageLow(); } break; case BLE_SET_PWLOW_DI0://设置欠压阈值 { frame_func_reply_BLE_SetVoltageLow(); } break; case BLE_READ_DAILY_DI0://读日结数据 { frame_func_reply_BLE_ReadDaily(); } break; case BLE_READ_MONTH_DI0://读月结数据 { frame_func_reply_BLE_ReadMonth(); } break; case BLE_RESET_MCU_DI0://MCU重启 { frame_func_reply_BLE_TernalRestart(); } break; case BLE_SET_CONFIG_DI0://设置功能配置字 { frame_func_s3_BLE_CfgFunctioncfg(); } break; case BLE_READ_FLOWTEMP_DI0://读瞬时流量和温度 { frame_func_reply_BLE_ReadInstantFlowAndTemperature(); } break; case BLE_ENTER_TEST_DI0://检定状态 { frame_func_reply_BLE_SetVerification(); } break; case BLE_READ_TEST_DI0://读检定数据 { frame_func_reply_BLE_ReadVerificationData(); } break; case BLE_READ_HIS_DI0://读某天历史数据 { frame_func_reply_BLE_ReadHistoryData(); } break; case BLE_OTA_NOTIC_DI0://OTA { frame_func_reply_BLE_SetOta(); } break; default: { up_deal_stat_ShenShui = UP_DEAL_S0; task_complete_ble = PTL_PACK_FAIL; } } frame_struct_ShenShui.ack_ctrl = 0xA0; } break; default: { up_deal_stat_ShenShui = UP_DEAL_S0; task_complete_ble = PTL_PACK_FAIL; } break; } return task_complete_ble; } static void Frame_ResetDealState_BLE_Static(void) { up_deal_stat_ble = UP_DEAL_S0; } /******************************************************************************* * @fun_name: Frame_CreatCrcCs_Ack * @brief : 组cs或CRC校验帧 * @param[in] : *p;len * @param[out]: None * @retval : None * @other : ******************************************************************************/ void Frame_ack_BleBase(STRUCT_FRAME_IES temp_struct, u8* p_temp_buf, u16 p_temp_len, u8* p_send_buf, u16* p_send_len) { int i = 0; UNION_2U8TOU16 temp_pack_len; p_send_buf[0] = 0xFE; p_send_buf[1] = 0xFE; p_send_buf[2] = FM_HEAD_MARK; p_send_buf[3] = MET_TYPE; for (i = 0; i < 7; i++) { p_send_buf[4 + i] = Sys_data_object.P1.met_addr[i]; } p_send_buf[11] = temp_struct.ack_ctrl; p_send_buf[12] = temp_struct.sta;//sta 0x40标识主动上传帧 0x80 位加密帧 0xc0为加密的主动上传帧 { temp_pack_len.datas = p_temp_len+4; p_send_buf[13] = temp_pack_len.datas_map.data0; p_send_buf[14] = temp_pack_len.datas_map.data1; p_send_buf[15] = temp_struct.DI0; //DI0 p_send_buf[16] = temp_struct.DI1; //DI1 p_send_buf[17] = temp_struct.serial_num0; //SER p_send_buf[18] = temp_struct.serial_num1; //SER memcpy(&p_send_buf[19], p_temp_buf, p_temp_len); if((temp_struct.sta & 0x01) == 0x01) { AES_encrypt(1,&p_send_buf[15], temp_pack_len.datas, Sys_data_object.P1.key);//加密 temp_pack_len.datas = (temp_pack_len.datas/16+1)*16; p_send_buf[13]=temp_pack_len.datas_map.data0;//蓝牙低位在前 p_send_buf[14]=temp_pack_len.datas_map.data1; } p_send_buf[15+temp_pack_len.datas]=0; for (i = 2; i < 15+temp_pack_len.datas; i++) { p_send_buf[15+temp_pack_len.datas] += p_send_buf[i];//校验和 } p_send_buf[16+temp_pack_len.datas] = FM_END_MARK; //帧结束符 *p_send_len = 17+temp_pack_len.datas; } } static void Frame_CreatAck_BLE(u8* p_send_buf, u16* p_send_len) { STRUCT_FRAME_IES temp_struct; temp_struct.ack_ctrl = frame_struct_ShenShui.ack_ctrl; temp_struct.DI0 = frame_struct_ShenShui.DI0; temp_struct.DI1 = frame_struct_ShenShui.DI1; temp_struct.sta = frame_struct_ShenShui.sta; temp_struct.serial_num0 = frame_struct_ShenShui.serial_num0; temp_struct.serial_num1 = frame_struct_ShenShui.serial_num1; Frame_ack_BleBase(temp_struct,g_frame_temp_send_buf_ble, g_frame_temp_len_ble, p_send_buf, p_send_len); } //------------------------------------------------------深水规约处理--------------------------------------------------/ /******************************************深水规约*************************************************************/ //解深水规约 static u8 crack_frame_ShenShui(u16 frame_lenth,u8 *frame_buffer) { u8 temp_res = crack_frame_IES_Base(frame_lenth, frame_buffer, &frame_struct_ShenShui); if(temp_res == SUCCESS_IES) { frame_struct_ShenShui.sta &= 0xFD; //表示非主动上传（bit1为1时表示主动上传，0表示应答） frame_struct_ShenShui.DI0 = *(frame_buffer + frame_struct_ShenShui.head_site + 12); frame_struct_ShenShui.DI1 = *(frame_buffer + frame_struct_ShenShui.head_site + 13); frame_struct_ShenShui.serial_num0 = *(frame_buffer + frame_struct_ShenShui.head_site + 14); frame_struct_ShenShui.serial_num1 = *(frame_buffer + frame_struct_ShenShui.head_site + 15); new_message_data_rev_ShenShui = frame_buffer + frame_struct_ShenShui.head_site + 16; frame_lenth = 0; return SUCCESS_IES; } return ERROR_IES; } //深水规约处理 static u8 up_deal_code_ShenShui(void) { task_complete_ShenShui = PTL_PACK_BUSY; switch(frame_struct_ShenShui.ctrl) { case SS_READ_HIS_CTRL: { switch(frame_struct_ShenShui.DI1) { case SS_READ_HIS_CTRL_ID1://深水规约读历史数据 { frame_func_reply_NB_ReadHistoryData(); } break; default: { up_deal_stat_ShenShui = UP_DEAL_S0; task_complete_ShenShui = PTL_PACK_FAIL; } } frame_struct_ShenShui.ack_ctrl = SS_ACK_READ_HIS_CTRL; } break; default: { up_deal_stat_ShenShui = UP_DEAL_S0; task_complete_ShenShui = PTL_PACK_FAIL; } break; } return task_complete_ShenShui; } static void Frame_ResetDealState_ShenShui(void) { up_deal_stat_ShenShui = UP_DEAL_S0; } //深水应答数据组帧 static void Frame_ack_ShenShui(u8* p_send_buf, u16* p_send_len) { STRUCT_FRAME_IES temp_struct; temp_struct.ack_ctrl = frame_struct_ShenShui.ack_ctrl; temp_struct.DI0 = frame_struct_ShenShui.DI0; temp_struct.DI1 = frame_struct_ShenShui.DI1; temp_struct.sta = frame_struct_ShenShui.sta; temp_struct.serial_num0 = frame_struct_ShenShui.serial_num0; temp_struct.serial_num1 = frame_struct_ShenShui.serial_num1; Frame_ack_IesBase(temp_struct,g_frame_temp_buf_ShenShui, g_frame_temp_len_ShenShui, p_send_buf, p_send_len); } /////////////////////////////////////对外接口,解规约//////////////////// u8 crack_frame_BLE(u16 frame_lenth,u8 *frame_buffer) { frame_flag = 0; if(SUCCESS_IES == crack_frame_BLE_Static(frame_lenth, frame_buffer)) { frame_flag = 1; return SUCCESS_IES; } if(SUCCESS_IES == crack_frame_ShenShui(frame_lenth, frame_buffer)) { return SUCCESS_IES; } return ERROR_IES; } //深水规约处理 u8 up_deal_code_ble(void) { if(frame_flag) { return up_deal_code_ble_static(); } else { return up_deal_code_ShenShui(); } } void Frame_ResetDealState_BLE(void) { if(frame_flag) { Frame_ResetDealState_BLE_Static(); } else { Frame_ResetDealState_ShenShui(); } } //应答数据组帧 void Frame_ack_BLE(u8* p_send_buf, u16* p_send_len) { if(frame_flag) { Frame_CreatAck_BLE(p_send_buf, p_send_len); } else { Frame_ack_ShenShui(p_send_buf, p_send_len); } } /************************************************************历史数据存储********************************/ //更新数据包中的当前流量和信息状态 static void Upload_RenewCurrentData(STRU_UPLOAD_FRAME* temp_frame) { MET_STATE temp_state; //状态字 u8 temp1 = 0; Fram_To_Float tmp_float; u8* hight_flow; DateTime tempRtcc_time; tmp_float.gp22_u32 = Gp30CheckDataApp(2); temp_frame->data.CurrentFlow.datas = (u32)(tmp_float.gp22_float*10);//当前累计流量 temp_frame->data.CurrentFlowForward.datas = temp_frame->data.CurrentFlow.datas;//当前累计正向流量 tmp_float.gp22_u32 = Gp30CheckDataApp(3);//当前累积逆向流量 temp_frame->data.CurrentFlowReverse.datas = (u32)(tmp_float.gp22_float*10); //获取:日最高流量(4字节),日最高流量持续时间(2字节),日最高流量开始时间(8字节,预留) RtccCheck_Hight_Flow(&hight_flow); for(temp1 = 0; temp1 <14 ;temp1++) { temp_frame->data.DailyHighestFlowAndTime[temp1] = *(hight_flow+temp1); } //获取电压值 temp_frame->data.UploadInfo.metinfo.bat_val.u16_data =HexToBcd16(PowerCheckValueSys()); temp_frame->data.UploadInfo.metinfo.bat_threshold_val = Sys_data_object.P1.voltage_low[0]+(Sys_data_object.P1.voltage_low[1]<<8);//欠压阈值3v //获取间隔流量:2B(间隔流量)X2(次/h)X24h=96B /* 上报时通过UPLOAD_DATA_READ_HIS获取，0点存储时通过UPLOAD_DATA_STEP_FLOW获取 */ //上报时间 RtccGetDateTime(&tempRtcc_time);//上报时间 temp_frame->data.UploadTime[0] = tempRtcc_time.s.second; temp_frame->data.UploadTime[1] = tempRtcc_time.s.minute; temp_frame->data.UploadTime[2] = tempRtcc_time.s.hour; temp_frame->data.UploadTime[3] = tempRtcc_time.s.day; temp_frame->data.UploadTime[4] = tempRtcc_time.s.month; temp_frame->data.UploadTime[5] = tempRtcc_time.s.year; temp_frame->data.UploadTime[6] = 0x20; //状态字 temp_state = FrameGetByte(); temp_frame->data.StateBytes[0] = temp_state.stat0; temp_frame->data.StateBytes[1] = temp_state.stat1; temp_frame->data.StateBytes[2] = temp_state.stat2; temp_frame->data.StateBytes[3] = temp_state.stat3; temp_frame->data.StateBytes[4] = temp_state.stat4; //累计活跃时间 temp_frame->data.DailyActiveTime.datas = GetEventUploadType();//上报类型 } static void SS_Store_CircleDataMachine(void) { switch (step_save_supplt)//数据存储 { case SS_STATE_S0://存储消息类型判断 { if (RtccCheckMsgApp(RtccMsg_OtherProtl)) { RtccClearMsgApp(RtccMsg_OtherProtl); RtccGetDateTime(&shenshui_rtcc_time); if((shenshui_rtcc_time.s.minute==0x00)||(shenshui_rtcc_time.s.minute==0x30)) { FrameSetMsgApp(MsgSS_JianGeStore);//半小时间隔流量存储消息 } if ((shenshui_rtcc_time.s.hour == 0)&&(shenshui_rtcc_time.s.minute==0x00))//冻结时间到，零点 { RtccSetMsgApp(RtccMsg_DataSave);//0点更新冻结数据 FrameSetMsgApp(MsgSS_HisIndexStore);//0点更新冻结数据指针 } } /**间隔流量和冻结数据存储：先0点存储冻结数据; 然后最后存储指针增加; 最后开始新的一轮间隔流量存储,期间判断写指针的有效性;*/ if(RtccCheckMsgApp(RtccMsg_DataSave))//0点保存冻结数据 { RtccClearMsgApp(RtccMsg_DataSave); FrameSetMsgApp(MsgBLE_AdvChange);//冻结数据时间,更新广播数据 step_save_supplt = SS_STATE_S10; } else if(FrameCheckMsgApp(MsgSS_HisIndexStore))//0点更新冻结数据指针 { FrameClearMsgApp(MsgSS_HisIndexStore); step_save_supplt = SS_STATE_S2; } else if(FrameCheckMsgApp(MsgSS_JianGeStore)) //半小时间隔流量存储 { FrameClearMsgApp(MsgSS_JianGeStore); step_save_supplt = SS_STATE_S20; } else if(FrameCheckMsgApp(Msg_ClearHisOther))//清表数据 { FrameClearMsgApp(Msg_ClearHisOther); step_save_supplt = SS_STATE_S40; } break; } /*0点更新冻结数据*/ case SS_STATE_S10: { if(TASK_IDLE == EepIfIdle()) { //(只)更新表计数据和表计状态 Upload_RenewCurrentData(&store_frame); EepWrite(store_frame.buf, (FRAME_NBIot_HISTORY_READ_ADD+(Sys_data_object.P1.histroy_w*PACK_NUM_GPRS)), CURRENT_DATA_INFO_LEN, &s_eep_complete_BLE); step_save_supplt = SS_STATE_S11; } break; } case SS_STATE_S11://保存上报时间 { if(TASK_IDLE == EepIfIdle()) { EepWrite(&store_frame.data.UploadTime[0], (FRAME_NBIot_HISTORY_READ_ADD+(Sys_data_object.P1.histroy_w*PACK_NUM_GPRS)+UPLOAD_TIME_ADDR), 7, &s_eep_complete_BLE); step_save_supplt = SS_STATE_WAIT; } break; } /*0点更新冻结数据指针*/ case SS_STATE_S2: { if(TASK_IDLE == EepIfIdle()) { Sys_data_object.P1.histroy_w++; if(Sys_data_object.P1.histroy_w>=PERIOD_DATA_NUM) { Sys_data_object.P1.histroy_w=0; } Sys_data_object.P1.Supplemental_send_flag.datas &=(~(0x0001<<(Sys_data_object.P1.histroy_w)));//清该位置补报标志 EepWrite(&Sys_data_object.P1.Supplemental_send_flag.datas_map.data0, FRAME_NBIot_BUBAO_FLAG, 6, &s_eep_complete_BLE); step_save_supplt = SS_STATE_WAIT; } break; } /*间隔流量存储*/ case SS_STATE_S20://半小时间隔流量时间判断:防止首次上电,日期变更 { if(EepIfIdle()) { if( (shenshui_rtcc_time.s.year == store_frame.data.StepFlowStartTime[5])&& (shenshui_rtcc_time.s.month == store_frame.data.StepFlowStartTime[4])&& (shenshui_rtcc_time.s.day == store_frame.data.StepFlowStartTime[3])) { step_save_supplt = SS_STATE_S22; } else { EepRead(FRAME_NBIot_HISTORY_READ_ADD+(Sys_data_object.P1.histroy_w*PACK_NUM_GPRS)+STEP_FLOW_TIME_ADDR, &store_frame.data.StepFlowStartTime[0], 7, &s_eep_complete_BLE); step_save_supplt = SS_STATE_S21; } } } break; case SS_STATE_S21: { if(EepIfIdle()) { if( (shenshui_rtcc_time.s.year == store_frame.data.StepFlowStartTime[5])&& (shenshui_rtcc_time.s.month == store_frame.data.StepFlowStartTime[4])&& (shenshui_rtcc_time.s.day == store_frame.data.StepFlowStartTime[3])) { step_save_supplt = SS_STATE_S22; } else//间隔流量无效,进行当前区域初始化 { //获取表计数据和表计状态 Upload_RenewCurrentData(&store_frame); //上报信号参数清除 store_frame.data.UploadInfo.metinfo.ecl_val =0; store_frame.data.UploadInfo.metinfo.RSRP_val =0; store_frame.data.UploadInfo.metinfo.single_val =0; store_frame.data.UploadInfo.metinfo.snr_val =0; //保存间隔流量起始时间 store_frame.data.StepFlowStartTime[0]= 0x00; store_frame.data.StepFlowStartTime[1]= 0x00; store_frame.data.StepFlowStartTime[2]= 0x00; store_frame.data.StepFlowStartTime[3]= shenshui_rtcc_time.s.day; store_frame.data.StepFlowStartTime[4]= shenshui_rtcc_time.s.month; store_frame.data.StepFlowStartTime[5]= shenshui_rtcc_time.s.year; store_frame.data.StepFlowStartTime[6]= 0x20; //间隔流量清除:2B(间隔流量)X2(次/h)X24h=96B for(int i = 0; i <96 ;i++)//间隔流量清除 { store_frame.data.StepFlow[i] = 0; } if(Sys_data_object.P1.histroy_w>=PERIOD_DATA_NUM) { Sys_data_object.P1.histroy_w=0; } EepWrite(store_frame.buf, (FRAME_NBIot_HISTORY_READ_ADD+(Sys_data_object.P1.histroy_w*PACK_NUM_GPRS)), PACK_NUM_GPRS, &s_eep_complete_BLE); } } } break; case SS_STATE_S22://存储某半点间隔流量 { if(EepIfIdle()) { u16 temp_step_flow_addr=0; //计算间隔流量 new_jiange_total_flow.gp22_u32 = Gp30CheckDataApp(2); jiange_data.datas = (u16)((new_jiange_total_flow.gp22_float - old_jiange_total_flow.gp22_float)*10); old_jiange_total_flow.gp22_u32 = new_jiange_total_flow.gp22_u32; //计算本时刻间隔流量存储位置 temp_step_flow_addr = FRAME_NBIot_HISTORY_READ_ADD+(Sys_data_object.P1.histroy_w*PACK_NUM_GPRS)+STEP_FLOW_START_ADDR + BCD2HEX(shenshui_rtcc_time.s.hour)*4 + (BCD2HEX(shenshui_rtcc_time.s.minute)/30)*2; EepWrite(&jiange_data.datas_map.data0, temp_step_flow_addr, 2, &s_eep_complete_BLE); step_save_supplt = SS_STATE_WAIT; //RtccAdjustDateTime(1,1800-10);//往后校时半小时//debug----------------- } } break; /*上报前更新并保存要读取的上报数据*/ /*清表数据初始化读写指针*/ case SS_STATE_S40: { if(TASK_IDLE == EepIfIdle()) { for(int i=0;i<7;i++) { store_frame.data.StepFlowStartTime[i]= 0x00; } Sys_data_object.P1.histroy_w = 0; Sys_data_object.P1.histroy_r = 0; Sys_data_object.P1.Supplemental_send_flag.datas = 0;//补报也清0 EepWrite(&Sys_data_object.P1.Supplemental_send_flag.datas_map.data0, FRAME_NBIot_BUBAO_FLAG, 6, &s_eep_complete_BLE); step_save_supplt = SS_STATE_WAIT; } break; } case SS_STATE_WAIT: { if(TASK_IDLE == EepIfIdle()) { step_save_supplt = SS_STATE_S0; } break; } default: { break; } } } extern u8 sys_reverse_flow_state; UNION_4U8TOU32 getBleWetState(void) { UNION_4U8TOU32 bel_state; u16 tmp_stat = Gp30CheckErrDataApp(); bel_state.datas=0; if(tmp_stat & 0x0001)//当前流量>Q4或者