/** ****************************************************************************** * @file stm32_lcd_driver.h * @author (C)2015, Qindao ieslab Co., Ltd * @version V1.0 * @date 2016-5-4 * @brief the function of the entity of system processor ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __UWater_LCD_DRIVER_H #define __UWater_LCD_DRIVER_H #ifdef __cplusplus extern "C" { #endif #include "ddl.h" #include "type.h" /* MACRO Define--------------------------------------------------------------------------*/ #define LCD_TIMEOUT_VALUE 60000 //超时时长，与所选的时钟、分频和死区时间有关 //LCD数字、字母、横杠、空白显示宏定义 #define DIS_0 0 //数字0 #define DIS_1 1 //数字1 #define DIS_2 2 //数字2 #define DIS_3 3 //数字3 #define DIS_4 4 //数字4 #define DIS_5 5 //数字5 #define DIS_6 6 //数字6 #define DIS_7 7 //数字7 #define DIS_8 8 //数字8 #define DIS_9 9 //数字9 #define DIS_A 10 //英文A #define DIS_B 11 //英文b #define DIS_C 12 //英文C #define DIS_D 13 //英文d #define DIS_E 14 //英文E #define DIS_F 15 //英文F #define DIS_P 16 //英文P #define DIS_t 17 //英文t #define DIS_HG 18 //横杠- #define DIS_BLANK 19 //空白 #define DIS_ALL_NUM 20 //数码管显示总数 //#define TIMER_100MS_MAX_SUM 8 //定时器时间 //固化字符显示 #define FUN_ALARM 0x00000001//bit0 //T1报警 #define FUN_MALFUNCTION 0x00000002 //T2故障 #define FUN_GPRSING 0x00000004 //T3正在无线通信 #define FUN_FLOW_LOW 0x00000008 //T4超低流量(滴漏) #define FUN_BATTERY_LOW 0x00000010//bit4 //T5电池电压低 #define FUN_TEMPERATURE 0x00000020 //T6温度 #define FUN_VALVE_CLOSE 0x00000040 //T7阀门关 #define FUN_TEST 0x00000080 //T8检定状态 #define FUN_TEST_DISPLAY 0x00000100//bit8 //T9用于检定时显示 #define FUN_M3 0x00000200 //T10 立方米m3 #define FUN_FH 0x00000400 //T11 符号 #define FUN_HOUR 0x00000800 //T12 小时 h #define FUN_YUAN 0x00001000//bit12//T13 元 #define FUN_SY 0x00002000 //T14 剩余 #define FUN_DJ 0x00004000 //T15 单价 #define FUN_GR 0x00008000 //T16 购入 #define FUN_JF 0x00010000//bit16//T17 缴费 #define FUN_P1 0x00020000 //T18 P1小数点 #define FUN_P2 0X00040000 //T19 P2小数点 #define FUN_P3 0x00080000 //T20 P3小数点 #define FUN_P4 0x00100000 //T21 P4小数点 //gaishanxiugai #define FUN_P5 0x00200000 //T22 P5小数点 #define FUN_P1G 0x00400000 //T23 P5小数点 #define FUN_P2G 0x00800000 //T24 P5小数点 #define FUN_P3G 0x01000000 //T25 P5小数点 #define FUN_P4G 0x02000000 //T26 P5小数点 #define FUN_P5G 0x04000000 //T27 P5小数点 #define FUN_REVERSE 0x08000000 //T28 逆流 //#define FUN_VALVE_OPEN 0x00020000 //T18 开阀 //#define FUN_YUAN 0x00040000 //T19 元 ////#define FUN_BK 0x00040000 //T19标况BK ////#define FUN_GK 0x00080000 //T20工况GK ////#define FUN_DOT 0x00100000//bit20//T21小数点DOT ////#define FUN_P2 0x00200000 //T22P2左二 ////#define FUN_P3 0x00400000 //T23P3右二 ////#define FUN_P4 0x00800000 //T24P4右一 ////#define FUN_P 0x00080000 //小数点起始位 #pragma pack(1) typedef struct { u32 bit0 : 1; u32 bit1 : 1; u32 bit2 : 1; u32 bit3 : 1; u32 bit4 : 1; u32 bit5 : 1; u32 bit6 : 1; u32 bit7 : 1; u32 bit8 : 1; u32 bit9 : 1; u32 bit10 : 1; u32 bit11 : 1; u32 bit12 : 1; u32 bit13 : 1; u32 bit14 : 1; u32 bit15 : 1; u32 bit16 : 1; u32 bit17 : 1; u32 bit18 : 1; u32 bit19 : 1; u32 bit20 : 1; u32 bit21 : 1; u32 bit22 : 1; u32 bit23 : 1; u32 bit24 : 1; u32 bit25 : 1; u32 bit26 : 1; u32 bit27 : 1; u32 bit28 : 1; u32 bit29 : 1; u32 bit30 : 1; u32 bit31 : 1; }LCD_RAM; //LCD数据显示寄存器LCD_RAM地址 #define lcd_ram0 ((LCD_RAM *)&(M0P_LCD->RAM0))//COM0 #define lcd_ram1 ((LCD_RAM *)&(M0P_LCD->RAM8)) #define lcd_ram2 ((LCD_RAM *)&(M0P_LCD->RAM1))//COM1 #define lcd_ram3 ((LCD_RAM *)&(M0P_LCD->RAM9)) #define lcd_ram4 ((LCD_RAM *)&(M0P_LCD->RAM2))//COM2 #define lcd_ram5 ((LCD_RAM *)&(M0P_LCD->RAMA)) #define lcd_ram6 ((LCD_RAM *)&(M0P_LCD->RAM3))//COM3 #define lcd_ram7 ((LCD_RAM *)&(M0P_LCD->RAMB)) //按位定义固化字符：LCD直接符号 //S1-SEG15 //S2-SEG14 //S3-SEG13 //S4-SEG12 //S5-SEG11 //S6-SEG51 //S7-SEG50 //S8-SEG49 //S9-SEG10 //S10-SEG9 //S11-SEG8 //S12-SEG7 //S13-SEG6 //S14-SEG5 //S15-SEG47 //S16-SEG46 //S17-SEG45 //S18-SEG44 //S19-SEG4 //S20-SEG3 //S21-SEG2 //S22-SEG1 //S23-SEG0 /**COM0*/ #define LCD_FUN_T25 lcd_ram0->bit15 //S1 #define LCD_FUN_T1 lcd_ram0->bit13 //S3 #define LCD_FUN_T2 lcd_ram0->bit11 //S5 #define LCD_FUN_T3 lcd_ram1->bit18 //S7 //高位 #define LCD_FUN_T4 lcd_ram0->bit10 //S9 #define LCD_FUN_P1 lcd_ram0->bit8 //S11 #define LCD_FUN_T20 lcd_ram0->bit6 //S13 #define LCD_FUN_T21 lcd_ram1->bit15 //S15 //高位 #define LCD_FUN_T22 lcd_ram1->bit13 //S17 //高位 #define LCD_FUN_T23 lcd_ram0->bit4 //S19 #define LCD_FUN_T11 lcd_ram0->bit2 //S21 #define LCD_FUN_T10 lcd_ram0->bit1 //S22 #define LCD_FUN_P5 lcd_ram0->bit0 //S23 /**COM1*/ #define LCD_FUN_T12 lcd_ram2->bit2 //S21 #define LCD_FUN_T6 lcd_ram2->bit1 //S22 #define LCD_FUN_P4 lcd_ram2->bit0 //S23 /**COM2*/ #define LCD_FUN_T8 lcd_ram4->bit2 //S21 #define LCD_FUN_T7 lcd_ram4->bit1 //S22 #define LCD_FUN_P3 lcd_ram4->bit0 //S23 /**COM3*/ #define LCD_FUN_T24 lcd_ram6->bit2 //S21 #define LCD_FUN_T5 lcd_ram6->bit1 //S22 #define LCD_FUN_P2 lcd_ram6->bit0 //S23 //按位定义固化字符：系统重定义//gaishanxiugai #define _FUN_T1 LCD_FUN_T1 #define _FUN_T2 LCD_FUN_T2 #define _FUN_T3 LCD_FUN_T3 #define _FUN_T4 LCD_FUN_T4 #define _FUN_T5 LCD_FUN_T5 #define _FUN_T6 LCD_FUN_T6 #define _FUN_T7 LCD_FUN_T7 #define _FUN_T8 LCD_FUN_T8 //#define _FUN_T9 #define _FUN_T10 LCD_FUN_T10 #define _FUN_T11 LCD_FUN_T11 #define _FUN_T12 LCD_FUN_T12 //#define _FUN_T13 //#define _FUN_T14 //#define _FUN_T15 //#define _FUN_T16 //#define _FUN_T17 //小数点 #define _FUN_T18 LCD_FUN_P1 #define _FUN_T19 LCD_FUN_P2 #define _FUN_T20 LCD_FUN_P3 #define _FUN_T21 LCD_FUN_P4 #define _FUN_T22 LCD_FUN_P5 //小数横杠 #define _FUN_T23 LCD_FUN_T20 //P1杠 #define _FUN_T24 LCD_FUN_T21 //P2杠 #define _FUN_T25 LCD_FUN_T22 //P3杠 #define _FUN_T26 LCD_FUN_T23 //P4杠 #define _FUN_T27 LCD_FUN_T24 //P5杠 #define _FUN_T28 LCD_FUN_T25 //逆流符号 /*关于LCD特性的一些宏,换到华大MCU所需要的宏*/ //LCD占空比 #define LCD_DUTY LCD_DUTY_1_4 #define LCD_DUTY_STATIC 0x00000000 //Static占空比 #define LCD_DUTY_1_2 (LcdDuty2) //1/2占空比 #define LCD_DUTY_1_3 (LcdDuty3) //1/3占空比 #define LCD_DUTY_1_4 (LcdDuty4) //1/4占空比 #define LCD_DUTY_1_8 (LcdDuty8) //1/8占空比 //LCD偏压比 #define LCD_BIAS LcdBias2 #define LCD_BIAS_1_4 0x00000000 //1/4偏压比 #define LCD_BIAS_1_2 LcdBias2 //1/2偏压比 #define LCD_BIAS_1_3 LcdBias3 //1/3偏压比 //LCD供电电压源 #define LCD_VOLTAGESOURCE LCD_VOLTAGESOURCE_EXTERNAL #define LCD_VOLTAGESOURCE_INTERNAL 0x00000000 //LCD使用内部电压源 #define LCD_VOLTAGESOURCE_EXTERNAL LcdExtCap //LCD使用外部电压源 //LCD对比度 #define LCD_CONTRASTLEVEL LCD_CONTRASTLEVEL_0 #define LCD_CONTRASTLEVEL_0 (0x00) //Maximum Voltage = 2.60V #define LCD_CONTRASTLEVEL_1 (0x02) //Maximum Voltage = 2.73V #define LCD_CONTRASTLEVEL_2 (0x04) //Maximum Voltage = 2.86V #define LCD_CONTRASTLEVEL_3 (0x06) //Maximum Voltage = 2.99V #define LCD_CONTRASTLEVEL_4 (0x08) //Maximum Voltage = 3.12V #define LCD_CONTRASTLEVEL_5 (0x0a) //Maximum Voltage = 3.26V #define LCD_CONTRASTLEVEL_6 (0x0c) //Maximum Voltage = 3.40V #define LCD_CONTRASTLEVEL_7 (0x0e) //Maximum Voltage = 3.55V //LCD死区时间 #define LCD_DEADTIME LCD_DEADTIME_2 #define LCD_DEADTIME_0 0x00000000 //没有死区时间 #define LCD_DEADTIME_1 (1) //不同的两帧之间有一个相位死区时间 #define LCD_DEADTIME_2 (2) //不同的两帧之间有两个相位死区时间 #define LCD_DEADTIME_3 (3) //不同的两帧之间有三个相位死区时间 #define LCD_DEADTIME_4 (4) //不同的两帧之间有四个相位死区时间 #define LCD_DEADTIME_5 (5) //不同的两帧之间有五个相位死区时间 #define LCD_DEADTIME_6 (6) //不同的两帧之间有六个相位死区时间 #define LCD_DEADTIME_7 (7) //不同的两帧之间有七个相位死区时间 //LCD脉冲持续时间 #define LCD_PULSEONDURATION LCD_PULSEONDURATION_7 #define LCD_PULSEONDURATION_0 0x00000000 //Pulse ON duration = 0 pulse #define LCD_PULSEONDURATION_1 (1) //Pulse ON duration = 1/CK_PS #define LCD_PULSEONDURATION_2 (2) //Pulse ON duration = 2/CK_PS #define LCD_PULSEONDURATION_3 (3) //Pulse ON duration = 3/CK_PS #define LCD_PULSEONDURATION_4 (4) //Pulse ON duration = 4/CK_PS #define LCD_PULSEONDURATION_5 (5) //Pulse ON duration = 5/CK_PS #define LCD_PULSEONDURATION_6 (6) //Pulse ON duration = 6/CK_PS #define LCD_PULSEONDURATION_7 (7) //Pulse ON duration = 7/CK_PS //LCD复用SEG #define LCD_MUXSEGMENT LCD_MUXSEGMENT_DISABLE #define LCD_MUXSEGMENT_DISABLE 0x00000000 //SEG pin multiplexing disabled #define LCD_MUXSEGMENT_ENABLE (LCD_CR_MUX_SEG) //SEG[31:28] are multiplexed with SEG[43:40] //LCD闪烁模式 #define LCD_BLINKMODE LCD_BLINKMODE_OFF #define LCD_BLINKMODE_OFF 0x00000000 //Blink disabled #define LCD_BLINKMODE_SEG0_COM0 (LCD_FCR_BLINK_0) //Blink enabled on SEG[0], COM[0] (1 pixel) #define LCD_BLINKMODE_SEG0_ALLCOM (LCD_FCR_BLINK_1) //Blink enabled on SEG[0], all COM #define LCD_BLINKMODE_ALLSEG_ALLCOM (LCD_FCR_BLINK) //Blink enabled on all SEG and all COM (all pixels) //LCD闪烁频率 #define LCD_BLINKFREQUENCY_DIV LCD_BLINKFREQUENCY_DIV8 #define LCD_BLINKFREQUENCY_DIV8 0x00000000 //The Blink frequency = fLCD/8 #define LCD_BLINKFREQUENCY_DIV16 (LCD_FCR_BLINKF_0) //The Blink frequency = fLCD/16 #define LCD_BLINKFREQUENCY_DIV32 (LCD_FCR_BLINKF_1) //The Blink frequency = fLCD/32 #define LCD_BLINKFREQUENCY_DIV64 (LCD_FCR_BLINKF_1 | LCD_FCR_BLINKF_0) //The Blink frequency = fLCD/64 #define LCD_BLINKFREQUENCY_DIV128 (LCD_FCR_BLINKF_2) //The Blink frequency = fLCD/128 #define LCD_BLINKFREQUENCY_DIV256 (LCD_FCR_BLINKF_2 |LCD_FCR_BLINKF_0) //The Blink frequency = fLCD/256 #define LCD_BLINKFREQUENCY_DIV512 (LCD_FCR_BLINKF_2 |LCD_FCR_BLINKF_1) //The Blink frequency = fLCD/512 #define LCD_BLINKFREQUENCY_DIV1024 (LCD_FCR_BLINKF) //The Blink frequency = fLCD/1024 //LCD高驱动 #define LCD_HIGHDRIVE LCD_HIGHDRIVE_DISABLE #define LCD_HIGHDRIVE_DISABLE 0x00000000 //High drive disabled #define LCD_HIGHDRIVE_ENABLE (LCD_FCR_HD) //High drive enabled //LCD标志定义 #define LCD_FLAG_ENS LCD_SR_ENS //LCD使能状态 #define LCD_FLAG_UDR LCD_SR_UDR //刷新显示请求标志 #define LCD_FLAG_UDD LCD_SR_UDD //刷新完成标志 #define LCD_FLAG_RDY LCD_SR_RDY //准备完成标志 #define LCD_FLAG_FCRSF LCD_SR_FCRSR //液晶帧控制寄存器同步标志 //LCD主任务机状态号 #define LCD_DISPLAY_S0 0 #define LCD_DISPLAY_S1 1 #define LCD_DISPLAY_S2 2 #define LCD_DISPLAY_S3 3 /* variables Define---------------------------------------------------------------*/ typedef struct { u32 T1 : 1; u32 T2 : 1; u32 T3 : 1; u32 T4 : 1; u32 T5 : 1; u32 T6 : 1; u32 T7 : 1; u32 T8 : 1; u32 T9 : 1; u32 T10 : 1; u32 T11 : 1; u32 T12 : 1; u32 T13 : 1; u32 T14 : 1; u32 T15 : 1; u32 T16 : 1; u32 T17 : 1; u32 T18 : 1; u32 T19 : 1; u32 T20 : 1; u32 T21 : 1; u32 T22 : 1; u32 T23 : 1; u32 T24 : 1; u32 T25 : 1; u32 T26 : 1; u32 T27 : 1; u32 T28 : 1; u32 T29 : 1; u32 T30 : 1; u32 T31 : 1; u32 T32 : 1; }SEG; typedef union { SEG seg; u32 word; } FUN_DATA; /* Function Declare------------------------------------------------------------*/ //初始化接口 extern void LcdInit(void); //工作接口 extern void LcdMachineDriver(void); extern void LcdClearAll(void); extern void LcdDisplayAll(void); extern void LcdDisplayData(u8 position, u8 data); extern void LcdDisplayFun(u32 fun); extern u8 LcdGetDisplayData(u8 position); extern u32 LcdGetDisplayFun(void); extern void LcdDisplayValve(u8 flag); extern void LcdDisplayVol(u8 flag); extern void LcdDisplayAlarm(u8 flag); extern void LcdDisplayActiveGPRS(u8 flag); extern void LcdDisplayPleasePay(u8 flag); extern void LcdDisplayEnable(void); extern void LcdDisplayDisable(void); void LcdClearData(u8 num); //新加工作接口 extern void LcdDisplayFailure(u8 flag); extern void LcdDisplayLowFlowAlarm(u8 flag); //新加工作接口备用 extern void LcdDisplayBuy(u8 flag); extern void LcdDisplaySurplus(u8 flag); extern void LcdDisplayPleasePay(u8 flag); extern void LcdDisplayPrice(u8 flag); extern void LcdDisplayYuan(u8 flag); //休眠前接口 extern u8 LcdIfSleep(void); extern void LcdPreSleep(void); //唤醒后接口 extern void LcdWakeSleep(void); /*宏名解释: PINS1 : LCD显示面板的SEG1 ; t25_e1_g1_f1 : SEG1引脚对应不同的COM可以点亮的段 ; SEG15 : 对应MUC的SEG15引脚 宏体 : 对应显示寄存器中的哪一位点亮,数值是2^bitX的十六进制*/ ////////////////////////////////////////////////////////////////////////////////////////////////////////// #define PINS1_T25_E1_G1_F1_SEG15 0X00008000//2^15 #define PINS2_D1_C1_B1_A1_SEG14 0X00004000//2^14 #define PINS3_T1_E2_G2_F2_SEG13 0X00002000 #define PINS4_D2_C2_B2_A2_SEG12 0X00001000 #define PINS5_T2_E3_G3_F3_SEG11 0X00000800 #define PINS6_D3_C3_B3_A3_SEG51 (0X00080000<<4)//高位 #define PINS7_T3_E4_G4_F4_SEG50 (0X00040000<<4)//高位 #define PINS8_D4_C4_B4_A4_SEG49 (0X00020000<<4)//高位 #define PINS9_T4_5E_5G_5F_SEG10 0X00000400 #define PINS10_D5_C5_B5_A5_SEG9 0X00000200 #define PINS11_P1_E6_G6_F6_SEG8 0X00000100 #define PINS12_D6_C6_B6_A6_SEG7 0X00000080 #define PINS13_T20_E7_G7_F7_SEG6 0X00000040 #define PINS14_D7_C7_B7_A7_SEG5 0X00000020 #define PINS15_T21_E8_G8_F8_SEG47 (0X00008000<<4)//高位 #define PINS16_D8_C8_B8_A8_SEG46 (0X00004000<<4)//高位 #define PINS17_T22_E9_G9_F9_SEG45 (0X00002000<<4)//高位 #define PINS18_D9_C9_B9_A9_SEG44 (0X00001000<<4)//高位 #define PINS19_T23_E10_G10_F10_SEG4 0X00000010 #define PINS20_D10_C10_B10_A10_SEG3 0X00000008 //com是实际接到单片机的COM编号 /*宏名解释:A0_COM4 意义是 A1段是需要MCU COM4配合SEG14来点亮的*/ #define A0_COM4 PINS2_D1_C1_B1_A1_SEG14 #define B0_COM3 PINS2_D1_C1_B1_A1_SEG14 #define C0_COM2 PINS2_D1_C1_B1_A1_SEG14 #define D0_COM1 PINS2_D1_C1_B1_A1_SEG14 #define E0_COM2 PINS1_T25_E1_G1_F1_SEG15 #define F0_COM4 PINS1_T25_E1_G1_F1_SEG15 #define G0_COM3 PINS1_T25_E1_G1_F1_SEG15 #define A1_COM4 PINS4_D2_C2_B2_A2_SEG12 #define B1_COM3 PINS4_D2_C2_B2_A2_SEG12 #define C1_COM2 PINS4_D2_C2_B2_A2_SEG12 #define D1_COM1 PINS4_D2_C2_B2_A2_SEG12 #define E1_COM2 PINS3_T1_E2_G2_F2_SEG13 #define F1_COM4 PINS3_T1_E2_G2_F2_SEG13 #define G1_COM3 PINS3_T1_E2_G2_F2_SEG13 #define A2_COM4 PINS6_D3_C3_B3_A3_SEG51 #define B2_COM3 PINS6_D3_C3_B3_A3_SEG51 #define C2_COM2 PINS6_D3_C3_B3_A3_SEG51 #define D2_COM1 PINS6_D3_C3_B3_A3_SEG51 #define E2_COM2 PINS5_T2_E3_G3_F3_SEG11 #define F2_COM4 PINS5_T2_E3_G3_F3_SEG11 #define G2_COM3 PINS5_T2_E3_G3_F3_SEG11 #define A3_COM4 PINS8_D4_C4_B4_A4_SEG49 #define B3_COM3 PINS8_D4_C4_B4_A4_SEG49 #define C3_COM2 PINS8_D4_C4_B4_A4_SEG49 #define D3_COM1 PINS8_D4_C4_B4_A4_SEG49 #define E3_COM2 PINS7_T3_E4_G4_F4_SEG50 #define F3_COM4 PINS7_T3_E4_G4_F4_SEG50 #define G3_COM3 PINS7_T3_E4_G4_F4_SEG50 #define A4_COM4 PINS10_D5_C5_B5_A5_SEG9 #define B4_COM3 PINS10_D5_C5_B5_A5_SEG9 #define C4_COM2 PINS10_D5_C5_B5_A5_SEG9 #define D4_COM1 PINS10_D5_C5_B5_A5_SEG9 #define E4_COM2 PINS9_T4_5E_5G_5F_SEG10 #define F4_COM4 PINS9_T4_5E_5G_5F_SEG10 #define G4_COM3 PINS9_T4_5E_5G_5F_SEG10 #define A5_COM4 PINS12_D6_C6_B6_A6_SEG7 #define B5_COM3 PINS12_D6_C6_B6_A6_SEG7 #define C5_COM2 PINS12_D6_C6_B6_A6_SEG7 #define D5_COM1 PINS12_D6_C6_B6_A6_SEG7 #define E5_COM2 PINS11_P1_E6_G6_F6_SEG8 #define F5_COM4 PINS11_P1_E6_G6_F6_SEG8 #define G5_COM3 PINS11_P1_E6_G6_F6_SEG8 #define A6_COM4 PINS14_D7_C7_B7_A7_SEG5 #define B6_COM3 PINS14_D7_C7_B7_A7_SEG5 #define C6_COM2 PINS14_D7_C7_B7_A7_SEG5 #define D6_COM1 PINS14_D7_C7_B7_A7_SEG5 #define E6_COM2 PINS13_T20_E7_G7_F7_SEG6 #define F6_COM4 PINS13_T20_E7_G7_F7_SEG6 #define G6_COM3 PINS13_T20_E7_G7_F7_SEG6 #define A7_COM4 PINS16_D8_C8_B8_A8_SEG46 #define B7_COM3 PINS16_D8_C8_B8_A8_SEG46 #define C7_COM2 PINS16_D8_C8_B8_A8_SEG46 #define D7_COM1 PINS16_D8_C8_B8_A8_SEG46 #define E7_COM2 PINS15_T21_E8_G8_F8_SEG47 #define F7_COM4 PINS15_T21_E8_G8_F8_SEG47 #define G7_COM3 PINS15_T21_E8_G8_F8_SEG47 #define A8_COM4 PINS18_D9_C9_B9_A9_SEG44 #define B8_COM3 PINS18_D9_C9_B9_A9_SEG44 #define C8_COM2 PINS18_D9_C9_B9_A9_SEG44 #define D8_COM1 PINS18_D9_C9_B9_A9_SEG44 #define E8_COM2 PINS17_T22_E9_G9_F9_SEG45 #define F8_COM4 PINS17_T22_E9_G9_F9_SEG45 #define G8_COM3 PINS17_T22_E9_G9_F9_SEG45 #define A9_COM4 PINS20_D10_C10_B10_A10_SEG3 #define B9_COM3 PINS20_D10_C10_B10_A10_SEG3 #define C9_COM2 PINS20_D10_C10_B10_A10_SEG3 #define D9_COM1 PINS20_D10_C10_B10_A10_SEG3 #define E9_COM2 PINS19_T23_E10_G10_F10_SEG4 #define F9_COM4 PINS19_T23_E10_G10_F10_SEG4 #define G9_COM3 PINS19_T23_E10_G10_F10_SEG4 #define SEG_NULL 0 #ifdef __cplusplus } #endif #endif /* __UWater_LCD_DRIVER_H */