mazhiyuan
/
X1UWaterWmbusISK
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
X1UWaterWmbusISK/common/system_hc32l19x.c

213 lines
8.5 KiB
C
Raw Permalink Blame History

/*******************************************************************************
* Copyright (C) 2019, Huada Semiconductor Co.,Ltd All rights reserved.
*
* This software is owned and published by:
* Huada Semiconductor Co.,Ltd ("HDSC").
*
* BY DOWNLOADING, INSTALLING OR USING THIS SOFTWARE, YOU AGREE TO BE BOUND
* BY ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT.
*
* This software contains source code for use with HDSC
* components. This software is licensed by HDSC to be adapted only
* for use in systems utilizing HDSC components. HDSC shall not be
* responsible for misuse or illegal use of this software for devices not
* supported herein. HDSC is providing this software "AS IS" and will
* not be responsible for issues arising from incorrect user implementation
* of the software.
*
* Disclaimer:
* HDSC MAKES NO WARRANTY, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE,
* REGARDING THE SOFTWARE (INCLUDING ANY ACOOMPANYING WRITTEN MATERIALS),
* ITS PERFORMANCE OR SUITABILITY FOR YOUR INTENDED USE, INCLUDING,
* WITHOUT LIMITATION, THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED
* WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR USE, AND THE IMPLIED
* WARRANTY OF NONINFRINGEMENT.
* HDSC SHALL HAVE NO LIABILITY (WHETHER IN CONTRACT, WARRANTY, TORT,
* NEGLIGENCE OR OTHERWISE) FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT
* LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
* LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) ARISING FROM USE OR
* INABILITY TO USE THE SOFTWARE, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS OF DATA,
* SAVINGS OR PROFITS,
* EVEN IF Disclaimer HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
* YOU ASSUME ALL RESPONSIBILITIES FOR SELECTION OF THE SOFTWARE TO ACHIEVE YOUR
* INTENDED RESULTS, AND FOR THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED
* FROM, THE SOFTWARE.
*
* This software may be replicated in part or whole for the licensed use,
* with the restriction that this Disclaimer and Copyright notice must be
* included with each copy of this software, whether used in part or whole,
* at all times.
*/
/******************************************************************************/
/** \file system_hc32l136.c
**
** System clock initialization.
** @link SampleGroup Some description @endlink
**
** - 2019-03-01 1.0 Lux First version.
**
******************************************************************************/
/******************************************************************************/
/* Include files */
/******************************************************************************/
#include "base_types.h"
#include "hc32l19x.h"
#include "system_hc32l19x.h"
#include "sysctrl.h"
/**
******************************************************************************
** System Clock Frequency (Core Clock) Variable according CMSIS
******************************************************************************/
uint32_t SystemCoreClock = 4000000;
//add clock source.
void SystemCoreClockUpdate (void) // Update SystemCoreClock variable
{
SystemCoreClock = Sysctrl_GetHClkFreq();
}
/**
******************************************************************************
** \brief 对MCU未引出IO端口进行默认配置.
**
** \param none
** \return none
******************************************************************************/
static void _InitHidePin(void)
{
uint32_t tmpReg = M0P_SYSCTRL->PERI_CLKEN0;
M0P_SYSCTRL->PERI_CLKEN0_f.GPIO = 1;
#if defined(HC32L19xPxxx) //100PIN MCU
M0P_GPIO->PFADS &= 0xFF4F; ///< PF04/PF05/PF07配置为数字端口
M0P_GPIO->PFDIR |= 0x00B0; ///< PF04/PF05/PF07配置为端口输入
M0P_GPIO->PFPU |= 0x00B0; ///< PF04/PF05/PF07配置为上拉
#elif defined(HC32L19xMxxx) //80PIN MCU
M0P_GPIO->PDADS &= 0x0F1F; ///< PD05~07/PD12~15配置为数字端口
M0P_GPIO->PEADS &= 0x783C; ///< PE00/PE01/PE06~10/PE15配置为数字端口
M0P_GPIO->PFADS &= 0xF9F3; ///< PF02/PF03/PF09/PF10配置为数字端口
M0P_GPIO->PDDIR |= 0xF0E0; ///< PD05~07/PD12~15配置为端口输入
M0P_GPIO->PEDIR |= 0x87C3; ///< PE00/PE01/PE06~10/PE15配置为端口输入
M0P_GPIO->PFDIR |= 0x060C; ///< PF02/PF03/PF09/PF10配置为数字端口
M0P_GPIO->PDPU |= 0xF0E0; ///< PD05~07/PD12~15配置为上拉
M0P_GPIO->PEPU |= 0x87C3; ///< PE00/PE01/PE06~10/PE15配置为上拉
M0P_GPIO->PFPU |= 0x060C; ///< PF02/PF03/PF09/PF10配置为数字端口
#elif defined(HC32L19xKxxx) //64PIN MCU
M0P_GPIO->PDADS &= 0x0004; ///< PD00/PD01/PD03~15配置为数字端口
M0P_GPIO->PEADS &= 0x0000; ///< PE00~15配置为数字端口
M0P_GPIO->PFADS &= 0xF9F3; ///< PF02/PF03/PF09/PF10配置为数字端口
M0P_GPIO->PDDIR |= 0xFFFB; ///< PD00/PD01/PD03~15配置为端口输入
M0P_GPIO->PEDIR |= 0xFFFF; ///< PE00~15配置为端口输入
M0P_GPIO->PFDIR |= 0x060C; ///< PF02/PF03/PF09/PF10配置为数字端口
M0P_GPIO->PDPU |= 0xFFFB; ///< PD00/PD01/PD03~15配置为上拉
M0P_GPIO->PEPU |= 0xFFFF; ///< PE00~15配置为上拉
M0P_GPIO->PFPU |= 0x060C; ///< PF02/PF03/PF09/PF10配置为数字端口
#elif defined(HC32L19xJxxx) //48PIN MCU
M0P_GPIO->PCADS &= 0xE000; ///< PC00~12配置为数字端口
M0P_GPIO->PDADS &= 0x0000; ///< PD00~15配置为数字端口
M0P_GPIO->PEADS &= 0x0000; ///< PE00~15配置为数字端口
M0P_GPIO->PFADS &= 0xF9C3; ///< PF02~05/PF09/PF10配置为数字端口
M0P_GPIO->PCDIR |= 0x1FFF; ///< PC00~12配置为端口输入
M0P_GPIO->PDDIR |= 0xFFFF; ///< PD00~15配置为端口输入
M0P_GPIO->PEDIR |= 0xFFFF; ///< PE00~15配置为端口输入
M0P_GPIO->PFDIR |= 0x063C; ///< PF02~05/PF09/PF10配置为数字端口
M0P_GPIO->PCPU |= 0x1FFF; ///< PC00~12配置为上拉
M0P_GPIO->PDPU |= 0xFFFF; ///< PD00~15配置为上拉
M0P_GPIO->PEPU |= 0xFFFF; ///< PE00~15配置为上拉
M0P_GPIO->PFPU |= 0x063C; ///< PF02~05/PF09/PF10配置为数字端口
#elif defined(HC32L19xFxxx) //32PIN MCU
M0P_GPIO->PAADS &= 0xFFF4; ///< PA00/PA01/PA03配置为数字端口
M0P_GPIO->PBADS &= 0x08FB; ///< PB02/PB08~10/PB12~15配置为数字端口
M0P_GPIO->PCADS &= 0xC000; ///< PC00~13配置为数字端口
M0P_GPIO->PDADS &= 0x0000; ///< PD00~15配置为数字端口
M0P_GPIO->PEADS &= 0x0000; ///< PE00~15配置为数字端口
M0P_GPIO->PFADS &= 0xF903; ///< PF02~07/PF09/PF10配置为数字端口
M0P_GPIO->PADIR |= 0x000B; ///< PA00/PA01/PA03配置为端口输入
M0P_GPIO->PBDIR |= 0xF704; ///< PB02/PB08~10/PB12~15配置为端口输入
M0P_GPIO->PCDIR |= 0x3FFF; ///< PC00~13配置为端口输入
M0P_GPIO->PDDIR |= 0xFFFF; ///< PD00~15配置为端口输入
M0P_GPIO->PEDIR |= 0xFFFF; ///< PE00~15配置为端口输入
M0P_GPIO->PFDIR |= 0x06FC; ///< PF02~07/PF09/PF10配置为数字端口
M0P_GPIO->PAPU |= 0x000B; ///< PA00/PA01/PA03配置为上拉
M0P_GPIO->PBPU |= 0xF704; ///< PB02/PB08~10/PB12~15配置为上拉
M0P_GPIO->PCPU |= 0x3FFF; ///< PC00~13配置为上拉
M0P_GPIO->PDPU |= 0xFFFF; ///< PD00~15配置为上拉
M0P_GPIO->PEPU |= 0xFFFF; ///< PE00~15配置为上拉
M0P_GPIO->PFPU |= 0x06FC; ///< PF02~07/PF09/PF10配置为数字端口
#endif
M0P_SYSCTRL->PERI_CLKEN0 = tmpReg;
}
/**
******************************************************************************
** \brief Setup the microcontroller system. Initialize the System and update
** the SystemCoreClock variable.
**
** \param none
** \return none
******************************************************************************/
void SystemInit(void)
{
M0P_SYSCTRL->RCL_CR_f.TRIM = (*((volatile uint16_t*) (0x00100C22ul)));
M0P_SYSCTRL->RCH_CR_f.TRIM = (*((volatile uint16_t*) (0x00100C08ul)));
SystemCoreClockUpdate();
_InitHidePin();
}
#if defined (__CC_ARM)
extern int32_t $Super$$main(void);
/* re-define main function */
int $Sub$$main(void)
{
SystemInit();
$Super$$main();
return 0;
}
#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
extern int32_t $Super$$main(void);
/* re-define main function */
int $Sub$$main(void)
{
SystemInit();
$Super$$main();
return 0;
}
#elif defined(__ICCARM__)
extern int32_t main(void);
/* __low_level_init will auto called by IAR cstartup */
extern void __iar_data_init3(void);
int __low_level_init(void)
{
// call IAR table copy function.
__iar_data_init3();
SystemInit();
main();
return 0;
}
#endif
Reference in New Issue View Git Blame Copy Permalink